Re-packing the
SRI FID/Methanizer tube
Place a nut and brass ferrules on the jet.
Position the jet so the tip of the jet is
centered in theFID body, then tighten
the nut. Be sure the jet does not change
position as you tighten the nut.
Put another nut and brass ferrule set on
the jet and slide it into the bulkhead fit-
ting.
Place another standard swagelok fitting
on the inside of the bulkhead to prevent
the jet from going in too far.
MethanizerRepack-
ingInstructions.pub
Page6
