Built-in air compressor filter kit installation
June 2010
TheAir LineFilter replacement kit
isSRI part# 8670-0075 and
includes:
Filter
6inches copper tube and sleeve
Swagelok nuts and ferrules
Two pieces 3/16” silicone tube
Two pieces 1/8” silicone tube
Snip the existing copper tubing in-
side theGCwhich runs from the
air compressor to the air out fitting.
Take out a 3 inch section of the
tubing. The cutter tool supplied
with everySRI GCworks nicely for
this.
Slide the smaller silicone tube over
the end of the copper, then slide
the larger silicone tube over the
smaller silicone tube to adapt the
1/8’ copper to the larger tube size
on the filter. A littlewater or saliva
makes it easier to slide the sili-
cone.
The copper tube should be almost
touching the filter tube to provide
for some rigidity. If there is a large
gap the soft silicone allows too
muchmovement.
Page2
