Installation of theWhisper Quiet Built-inAir
compressor in theSRI 8610C/310CGC
Use a nut driver or small socket
wrench to tighten the four lock nuts
( nut with nylon inserts in the nut ).
Tighten the lock nuts snug but not
so tight that the rubber foot of the
air compressor is squished. The
idea is that the air compressor feet
will be secure but loose and flexi-
ble so the vibration of the air com-
pressor is not transmitted to the
chassis.
When the air compressor is in
place it should like like the photo.
Bend the copper tubing as neces-
sary so the tubingdoes not touch
anything.
Tighten the 1/8inch bulkhead fitting
in the holemarkedAIROUT. Be
sure to use a lockwasher on both
sides of the chassis to prevent the
bulkhead fitting from rotating.
Page7
