A/DBoardCapacitor andGroundWire Installation
302 and 333Boards
For a333A/DBoard:
Solder the
capacitor to the same terminals on
the back of theA/D board as
shown in the picture to the right.
Trim the capacitor legs short in or-
der to prevent electrical short cir-
cuitingand tomake sure theboard
will fit back into the chassis. Once
it is soldered in, bend the capacitor
down so that it rests flat on the
board.
For a302A/DBoard:
Solder the
capacitor to the small boardat-
tached directly to the shell of the
USB jack as shown in the picture
to the right. Trim the capacitor legs
short in order to prevent electrical
short circuiting and tomake sure
the boardwill fit back into the
chassis. Once it is soldered in,
bend the capacitor down so that it
rests flat on the board.
Gently replace the boardback into
its space in theGC chassis and re-
secure it using the 4 hex screws.
Tilt theGC back downand reat-
tach the chassis to thebase plate
with the 6 screws.
Page 3
