Installation
23 of 82
Figure 10 Glove Box Control System
Figure 11 Bower Control screen
Starting the blower automatically opens the valves on the column and circulates the box
atmosphere through the purifier column. There will be a momentary rise in oxygen because of
the small amount of air trapped in the blower.
The blower provided is continuously variable; it can be set at a very low speed if you are
handling sensitive crystals or during weighing. It can be set at a maximum to recover quickly
from an operator error.
We suggest it be set at 50% during normal operation. Blower speed can be changed by pressing
the numeric value next to the Change Blower Speed. Pressing this numeric value opens up a
numeric entry screen where the desired blower speed can be entered. The value entered is a
percentage. 0 means the blower is not circulating. 100% means that the blower is circulating at
full speed.
108
