235
E
ENVIRONMENTAL CHAMBERS
Temperature & Humidity
Temperature and humidity
Features:
●
The incubator is made with imported NC machine
tool and laser processing technology. The outside
incubator body applies high quality cold rolling
plate, which is strongly resistant to rusting. The inner
bag applies SUS304 stainless plate
●
The incubator bottom truckle is imported from
Japan. Its direction is adjustable and it can be
locked. The outside incubator body is sprayed with
American Dupont powder.
●
One test hole with the diameter of 45mm made
with special mould is arranged on the left and right
of the incubator respectively for observation. Two
silica gel soft plugs are provided inside.
Temperature and humidity
●
The heat insulating material of incubator applies
Germany Bayer freon-free polyurethane one-time
foaming technology to improve the insulating property
and reduce energy consumption. It can save over 30%
energy in comparison with similar products. The overall
strength of incubator is good.
●
Rational air duct structure; balance type control method;
imported special electric motor and blade are applied
to make temperature and humidity distribution even
and greatly improve test precision and evenness of
temperature and humidity.
●
International famous brand refrigerant compressor and
Germany EBM condenser applying 134a refrigerant and
featuring fluorine free, environmental protection are
applied and conform to the world trends.
●
Programmed temperature and humidity control;
micro-computer fuzzy control PID control; temperature
priority and time priority; optional for the user. Intelligent
programmed mode is applied. The control part applies
high brightness super large LCD and fuzzy PID control
method to be more humanized.
●
Temperature sensor PT1 00 applies Honeywell product.
The humidity sensor applies Swiss Rotronic capacitive
sensor.
●
Over-temperature protection, creepage protection, door
open alarm, current failure;.e alarm and sensor alarm
functions are provided to improve the safety. Meanwhile,
automatic start, stop, timed operation, clock display and
self recover after power fails are provided.
●
Automatic defrosting and manual defrosting functions
are provided for long term test to solve the problem of
temperature and humidity drifting.
Model
CCG-100
CCG-150
CCG-250
Convection method
Compulsory convection method
Control method
Balance type
Temperature range
-10°C
~
+85°C
Humidity control scope
20 ~ 98%
Temperature resolution
0.1°C
Temperature fluctuation
±
0.1°C
Temperature evenness
±
0.5°C (65°C)
Humidity fluctuation
Within ± 1.5% (65°C)
Working room temperature
5
~
35°C
Insulating material
Overall foaming of polyurethane
Programmed control
Fuzzy logistic PID control method common operating
mode/programmed operating mode
Overall dimension(mm)
W590 x D733 x H1140
W665 x D733 x H1300
W765 x D773 x H1490
Inner dimension (mm)
W465 x D400 x H540
W540 x D400 x H700
W640 x D440 x H890
Weight
About 93KG
About 114.5KG
About 137KG
Effective volume
100L
151L
250L
Total power of heating and
humidifying
1000W
1450W
2000W
Refrigerating power- refrigerant
175W,R134a
245W,R134a
270W,R134a
Water supply volume
Inside: 10 L Outside: 25 L
Power voltage
AC-220V 50/60Hz
Tray (standard configuration)
Two layers
Three layers
Three layers
●
Performance parameter test under empty load: Ambient temperature of 20°C, ambient humidity of 50%RH.
●
Temperature and humidity fluctuation exceeding the scope noted in the table is normal under defrosting condition.
●
The change of product appearance and parameter will not be notified additionally. Product appearance may
deviate due to shooting and printing reasons.
