245
Utility Requirement:
1. Building main supply 110V
‐
60 Hz or 220V
‐
50 Hz with
electrical safety cutoff switch.
2. Autoclave for sterilization.
3. Cooling Circulating Water Bath for cooling purpose.
4. Compressor Air to supply air, which comes with a
reducer to control pressure to around 1 kg/cm
2
.
This air is to be dry, oil
‐
free and filtered.
5. Computer for remove control.
Optional Item:
1. Low Speed Agitation Driver : 5 ~ 300 rpm
2. Oxygen Enrichment Device
3. One external pump
Specification :
‐
Model # : MU
‐
D01
‐
Rpm and increment : 20 ~ 300 rpm ; 1 rpm
‐
Motor Type : Brush
‐
less motor
‐
Number of roller : 1
4. ORP probe : Gel
‐
filled electrode; Autoclavable
FERMENTORS
F
Thermostat system (Jacket vessel type)
Jacket vessel
(Dish bottom)
Vessel
10L
7L
5L
3L
13.4
9.3
7
4
Total volume(Liter)
Borosilicate glass / 316L ss for headplate and all fittings
Material
10.4” Color Touch screen Interface
Control panel
Control unit
Remote control through Ethernet (SCADA)
Communication port
Up to 59,994 program for different kinds of condition
Storage Program
Up to 10 data files
Data storage
USB port
Data storage interface
ABS front panel and iron painted housing
Cabinet material
Footprint: 400 x 500 mm (W x D) ; Height: 735 mm
Dimension
110V or 220V ; 50/60 Hz
Rated voltage
2 – 20 LPM
1 – 10 LPM
Inlet Gas Flow-meter
Aeration
Two different type of impeller –
a. 3 pcs of adjustable Rushton-type impeller
b. 2 pcs of adjustable Pitched-blade impeller
note:
1. Rushton-type impeller is for cell line that are not considered shear-sensitive
2. Pitched-blade impeller for shear-sensitive cell line
3. The standard system includes one type impeller. It is option for another type.
It is available for customer-made impeller).
Impeller
Orifice ring
Sparger
Removable 316L stainless steel baffles
Baffle
Thermostat system; Built-in heat exchanger
(400 W heater/water circulation pump); Automatic cooling water valve
Control system
Temperature
5°C above coolant up to 60°C
Range
Platinum RTD probe (Pt 100)
Probe
Programmable 15 steps PID controller
Control mode
Removable Top brushless motor
Drive
Agitation
Two type of agitation motor:
a. 30 – 1200 rpm is for general fermentor;
b. 5 – 300 rpm is for shear-sensitive cell line
(The standard system includes one type of agitation motor. It is option for another
type.)
Speed Range
Programmable 15 steps PID controller
Control mode
2-12 pH / Gel-filled electrode; Autoclavable
Range / Probe
pH
PID
Control mode
0 – 200% / Polarographic DO sensor; Autoclavable
Range / Probe
DO
PID; Cascade function to response to
a. Stepping increasing or decreasing agitation speed
b. Oxygen Enrichment Device (optional item)
c. To start substrate feeding program.
Control mode
316L stainless steel protector with insulated Teflon tube; On/Off controller
Probe
Foam
Built-in 4 sets of pumps; One external pump (optional)
Peristaltic
pump
Precise Stepping motor; min. speed is 1 rpm
0 – 100 rpm
Speed range
Programmable 15 steps feeding control;
Pump can be assigned for Acid, Base, Anti foam and Substrate
Control mode
316L Stainless steel condenser
Exhaust
