241
E
Gel Eluter
EXELUTOR
PAK6
PAK6
Model
ds DNA, ss RNA, Protein
Applicable Sample
Platinum
Electro-rod & Eletro-Ring
W290xD135xH150
Dimensions (mm)
1.8kg
Weight
PAK6, Exelutor, Capacity-6 samples
●
Economical & quickest equipment with the best yield
●
95% elution within 4 minutes. (DNA, RNA, PROTEIN)
●
Sturdy, small and easy to handle
●
6 different samples can be applied simultaneously
●
0.2-0.5ml of buffer is sufficient for elution.
●
It is possible to purify samples within an hour.
You can apply agarose and polyacrylamide gel
slices including nucleic acide or protein on the
EXELUTOR Pak6 and apply at 25-35V for 2-5min.
In case of incomplete elution, a second attempt
can be made by replacing the buffers.
The Elution time is flexible according to the kinds
and sizes of samples and in case of linear DNA,
4min is sufficient for the size up to 10kb.
Eluted DNA can be extracted with phenol!
chloroform once and then ethanol-preciitated
according to the routine methods. High yield of
more than 90%.
●
Since disposable parafilm is used for the sample
plate, you don’t have to worry about
contamination.
●
0.2-0.5ml of buffer is sufficient for elution.
●
There is nearly no trouble.
●
It is easy to handle.
PT-Ring
PT-Rod
How to Use:
UP
Top plate
stopping knob
1.
Lift up the
top plate
and fix it
up by the
stopping
knob.
2.
Place the
disposable
parafilm
under the
electronic
ring.
3.
Place a
gel slice
on the
center of
the
electronic
ring.
4.
Lift the
top plate
down.
Down
5.
The
Electrode
should
be
touched
on the
gel slice.
6.
Pull the
buffer out
inside the
electronic
ring
enough
to cover
the gel
slice.
7.
Confirm
the switch
and the
lamp off.
8.
Control
the
voltage
in the
between
20V-40V
on power
9.
Turn on
the switch.
10.
Come out
small
bubbles
from gel
slice.
11.
Using UV
lamp.
The DNA
coming
out from
gel slice
could be
seen.
12.
After
2-4min.
Turn
out the
switch.
13.
ILift the
top plate.
14.
Absorbing
the buffer
by a
Pipette.
supply. If the voltage over 50V.
The lamp and electrode could
defected.
UP
Accessories:
