216
ELECTRONICS
E
MO-2013, high precision milliohm meter
Model
MO-2013
Test Range (Test Current)
20 m ohm (1A DC), 200m ohm (1A DC), 2 ohm (100mA DC),
20 ohm (10mA DC), 200 ohm (1mA DC), 2K ohm (100uA DC), 20K ohm (10uA DC)
Warning Setup
* Warning LED Indicator * Buzzer
Operating Temp.
0 to 50°C (32 to 122°F).
Operating Humidity
Less than 80 % R.H.
Power Supply
AC 110V ± 15%, 50/60 Hz or AC 230V ± 15%, 50/60 Hz.
Power Consumption
AC 110V: Approx. 33 mA, AC 230V: Approx. 15 mA
Fuse for Power Supply
* 500 mA/250 V * Size: 5 X 20 mm dia.
Data Output
RS 232/USB PC serial interface. *Connect the optional RS232 cable UPCB-02 will
get the RS232 plug. *Connect the optional USB cable USB-01 will get the USB plug.
Dimension
280 x 210 x 90 mm (11.0 x 8.3 x 3.5 inch)
Weight
Approx. 2.04 Kg (4.49 LB).
Standard Accessories
* Power cord: 1 PC. * Instruction manual: 1 PC. * 4 wire with 2 Kelvin clips: 1 pair
Optional Accessories
*RS232 cable, UPCB-02 * USB cable, USB-01 * Data Acquisition software, SW-U801-WIN
●
4 terminal devices for accurate measurement of very low resistance.
●
Ideal for measuring the resistance of components precisely.
●
Ideal for testing protective conductors, lightning conductors & welded points.
●
High/Good/Low set-function for input quality control.
●
Build in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.
●
Especial "CALCULATE" function to measure cable/wire length.
●
Wide measuring range, 0.01 m ohm - 20K ohm, 7 ranges.
●
RS232/USB computer interface.
●
26.7 mm large size and back-light LCD display, easy read-out.
●
LSI circuit provides high accuracy, reliability and durability.
●
Built-in over input protection.
●
Durable bench type housing plastic case stand.
FG-2003, Function Generator
Model
FG-2003
Generator
Frequency
0.5 Hz ~ 3 MHz with 5 digit LED display, Max. resolution 0.001 Hz in 6 steps.
Waveform
Sine, Square, Triangle, Ramp, Positive Pulse and Negative Pulse; 6 waveforms total.
Stability
0.1 % ~ 15 minutes after power-on.
Counter
Display
5 digits 0.36" red LED.
Max. Resolution
0.001 Hz.
Display Unit
Hz / KHz Automatically controlled by CPU.
Common Specification
Limits of Operation
0 ~ 40 °C, 10 ~ 80 %R.H.
Storage Environment
-20 ~ 70 °C, 0 ~ 90 %R.H.
Power Consumption
25W.
Power Source
AC 115 V (±10%) 50/60 Hz, FUSE:600 mA, AC 230 V (±10%) 50/60 Hz, FUSE:300 mA
Ventilation
DC 12 V / 100 mA Fan.
Dimension
275 x 90 x 300 mm.
Weight
2.5 Kg / 5.5 LB.
Standard Accessories
* Power cord: 1 PC. * operation manual: 1 PC.
Optional Accessories
AT-20: Telescoping RF pick-up antenna with BNC connector.
PB-21: Direct cable with BNC connector & alligator clip pairs.
(Be used only for the measuring frequency
≥
500 MHz)
BB-22: Direct cable with double BNC connector.
NN-23: Direct cable with double N coaxial connector.
NB-24: BNC to N coaxial connector adapter.
●
The FG-2003 is a deluxe function generator combined with a 5 digit, high
resolution 60 MHz counter.
●
The FG-2003 is a deluxe function generator
combined with a 5 digit, high resolution 60 MHz counter.
●
Function
Generator: 6 waveforms selected by rotary witch instead of push button, to
prevent miss-touch or bad connection. Maximum output 20Vp-p(No-load),
and Minimum output 0.1Vp-p (No-load).
●
Pulse Generator: FG-2003
provides positive pulse and negative pulse output, Maximum output 20Vp-p
(No-load). Frequency is displayed by LEDs, pulse width is from 0.4sec to
100ns. This will meet most of your audio, Video and other basic electronic
application requirements.
●
Sweep Generator: FG-2003 provides linear
sweep or log sweep selection switch to select the sweep mode. Maximum sweep width is 1:100 and sweep speed is
from 5sec to 10ms. The FG-2003 also provides VCF input and synchronous Output Function.
●
The FG-2003 has a 5 digit
micro controlled counter. FG-2003 features include auto ranging, auto gate time, high resolution 0.001Hz, high input
impedance 1M
Ω
, and high bandwidth 0.2Hz~60MHz. FG-2003 also provides triggering features such as an adjustable
trigger ±2.5V with LED indicator, AC/DC selector, 100KHz filter, and input attenuator input x 20 for 300Vrms high voltage
signal. The unit will also display the frequency of the signal produced by the function generator.
Milliohm Meter, Function Generator
MO-2013
FG-2003
