82
PeakSimpleDataSystems
Model 333SingleChannel DataSystem
• EasyUSBConnection to yourWindows
TM
PC
• Eight TTLOutputs andOneRemoteStart Input
• Four optional Contact Closures
• IncludesPeakSimpleSoftware
The Model 333 is standard in every 8610, 410 or 310 GC and 210 HPLC. It can also be mounted in a
separate box, ready for connection to other manufacturers’ GC detectors. The Model 333 Data System
consists of PeakSimple forWindows software and a single channel, 20-bit high resolutionA/Dboard.
When mounted in an SRI GC, the Model 333 controls the column oven temperature program, and the
pressure program of the carrier gas electronic pressure controller (EPC). The eight available TTL outputs
are connected internallywithin theGC to control functions such as valve rotation, gas solenoid actuation,
autosampler injection, etc.
Whenmounted in a separate box, the temperature and pressure control outputs are available for use, but
not connected to anything. The eight TTL outputs can optionally be wired to a bank of four single-pole,
dual-throwmechanical relayswith screw terminals for easy connection to any user devicewhich operates
from a contact closure. A remote start input allows run initiation from the user’sGC. Data can be acquired
at rates up to50Hz.
The 230 volt system is suppliedwith aUL, CSA, andCE/VDE approved universal power supply, whichwill
operate on anyAC voltage from100-250 volts. For computerswithUSBports only.
8600-1050
Model 333SingleChannel DataSystem
8600-1250
Model 333, 230VAC
8600-1051
Optional 4Contact Closures
