• 18 •
www.restekcorp.comPeak Performers
New GC Accessories to Make Your Analyses
Easier and More Reproducible
Introducing Super-
Clean
™
gas filters
✔
Full glass/metal design
✔
High-purity output
(six-9s=99.9999% purity)
✔
Features “quick connect”
for quick cartridge
changes
This line of Super-Clean gas filters is the latest in
cartridge gas filtration. Cartridge systems make
changing gas filters quick and easy. The system
works using a baseplate that allows cartridges to
be exchanged without introducing oxygen. The
spring-loaded check valves seal when a filter is
removed and open only when a new filter has
been locked in place. There is no longer a need
for loosening and tightening fittings every time a
trap is changed.
The Triple Filter model is ideal for carrier gas
purification. This trap contains the oxygen, mois-
ture, and hydrocarbon scrubber in one cartridge.
The gas purity of your carrier gas through the
Triple Filter is better than six-9s, ideal for mass
spectrometry and for protecting your columns
against damage.
The Fuel Gas Filter cartridge is perfect for purifying
FID fuel gases, removing both moisture and hydro-
carbons. Using the Fuel Gas Filter for FID hydrogen
and air will produce a stable baseline, improving
overall FID reproducibility and sensitivity.
Single filters for oxygen, moisture, and hydrocar-
bon; and 2- or 3-position baseplates are available
from stock.
Carrier Gas Cleaning Kit
Includes mounting baseplate,
1
8
" inlet/outlet fit-
tings, and oxygen/moisture/hydrocarbon triple fil-
ter: cat.# 22019, (kit)
Replacement oxygen/moisture/hydrocarbon triple
filter: cat.# 22020, (ea.)
Fuel Gas Purification Kit
Includes mounting baseplate,
1
8
" inlet/outlet fit-
tings, and hydrocarbon/moisture filter: cat.#
22021, (kit)
Replacement fuel gas hydrocarbon/moisture filter:
cat.# 22022, (ea.)
Replacement O-rings for baseplate (contains 10 lg.
& 10 sm. o-rings): cat.# 22023, (20-pk.)
To adapt baseplates for
1
4
" fittings use a
1
8
" to
1
4
"
tube-end union: cat.# 21833, (5-pk.)
Inlet liner removal tool
✔
Easily remove liners from
injectors
✔
Made from high-temperature
silicone
✔
Won't chip or crack the liner
cat.# 20181, (3-pk.)
Sapphire scribe
✔
Cuts fused silica tubing
✔
Results in a good,
square and clean cut
cat.# 20182, (ea.)
Brass capillary nuts for Agilent
5890/6890 GCs
✔
Eliminates sticking or
crossed threads
✔
Use for either compact
or standard
1
16
" ferrules
For use with "short"
Agilent-style ferrules:
cat.# 21878, (2-pk.) $25
For use with standard
1
16
" -type ferrules:
cat.# 21879, (2-pk.)
FIX IT laboratory Swiss knife
✔
Every GC analyst
should have one!
✔
Genuine Swiss Army
quality with 5-year
warranty
✔
Includes a magnify-
ing glass to check
column end cuts
✔
15-function tool including inlet liner remover,
screwdrivers, scissors, blade, and tweezers
cat.# 23013, (ea.)
GC accessory organizer
✔
Ideal for
organizing GC
accessories
and supplies
✔
Built-in syringe
and vial holders
✔
Mounts on the GC for easy access
✔
Includes all mounting hardware
For Agilent 5890/6890 GCs: cat.# 22681, (qty.)
For Varian GCs: cat.# 22682, (qty.)
Thermal Gas Purifiers
✔
Removes oxygen, water, carbon monoxide,
carbon dioxide and hydrocarbons
✔
Purity in ppb levels
✔
Mass Spec. purity carrier gas produced
✔
Dual-tube model purifiers double capacity at
less than double the price
✔
Welded end-fittings on getter tubes eliminate leaks
✔
Packed with reactor-grade, pure getter material
for maximum efficiency and no contamination
Introducing Restek’s line of re-engineered thermal
gas purifiers. This line of purifiers works by pro-
ducing a chemical reaction between impurities in
the carrier gas stream and the getter material.
Because the reaction is non-reversible, there is no
possibility of contaminants breaking through the
thermal gas purifier.
Gas purification is very economical when using a
thermal gas purifier. After initial installation cost,
getter tubes only require changing every year;
heavy use and very impure feed gas may require
more frequent getter tube replacement.
Restek Single-Tube Thermal Gas Purifier,
110 Volt:
1
8
" Fittings: cat.# 21496, (ea.)
1
4
" Fittings: cat.# 21497, (ea.)
Restek Dual-Tube Thermal Gas Purifier,
110 Volt:
1
8
" Fittings: cat.# 21498, (ea.)
1
4
" Fittings: cat.# 21499, (ea.)
Replacement Straight Getter Tubes:
1
8
" Fittings: cat.# 21661, (ea.)
1
4
" Fittings: cat.# 21660, (ea.)
by Gary Barone, GC Accessories Product Marketing Manager
Special promotional offer to get you started
with Super-Clean
™
Gas Filters!
Buy an oxygen/moisture/hydrocarbon triple filter and receive a mounting baseplate with
1
8
" inlet and
outlet fittings for no additional charge.
(Offer good through July 31, 2001):
cat.# 22024, (kit)
new
new