42
GCChassisTypes
Model 110Stand-aloneDetectorChassis
• Addup toFourDetectors toAnyGC
• Dimensions: 8.5”wide x 13.5” high x 14.5” deep
• HeatedTransfer Line for connection toHost GC
The Model 110 Chassis can be conigured as a stand-alone detector chassis, capable of mounting any
combination of up to 4 detectors. The Model 110 is equipped with a heated transfer line for connection
to the host GC, from SRI or any other manufacturer. The heated transfer line requires only a small hole in
the host GC’s column oven, so the 110makes it easy to add detectors even to older units that are out of
production. The fused silica lined, metal heated transfer line operates at 200°C, which is hot enough for
most applications. However, analysis of high boiling analytesmay not be possible if they could condense
in the line at this temperature. For those detectors that require support for gases such as hydrogen or air,
the 110 is equippedwith electronicpressure controllers (EPC) for eachgas. Anoptional “whisper quiet” air
compressormaybe installed toprovideair for FID, DELCD, and/or FPDdetectors. The standardModel 110
is equipped with analog signal cable output (0-5V) for connection to your data system, integrator or strip
chart recorder. Asinglechannel or sixchannel PeakSimpledatasystemmaybe installed forPC-baseddata
acquisition.
TheModel 110chassishasbeenused for avarietyof uniquecustomsolutions. Pleasecontact us regarding
your applicationneeds.
Standard equipment:
Model 110 chassis; heated transfer line; “at-a-glance” display of detector temperatures, pressures, and
voltages; analog signal cable for connection to data system; operator’smanual; accessory kit; heavy duty
reuseable shippingcontainer. TocompletelyconigureaModel 110GC,most userswill need to specifyone
ormoredetectors tobemountedon the chassis.
0110-0003
Model 110chassiswithStandardEquipment
VOLTAGE: for 115VAC, use “part number-1” [ex: 0110-0003-1] for 230VAC, use “part number-2”
