Basic HTML Version
BTU Gas Analyzer GC System - SRI Instruments
Natural Gas Analyzer GC System
17
|
|
|
|
●
TCD Detector
●
10-port Gas Sampling Valve
●
1-meter Hayesep-D Packed Column
●
30-meter, 0.53mm MXT-1 Capillary Column
●
1 channel PeakSimple Data System
...on the compact
chassis
The Natural Gas Analyzer GC system is pre-plumbed and ready to measure N
2
, methane, CO
2
,
ethane, H
2
O, propane, iso- and normal pentanes, iso- and normal pentanes, and C
6
plus
backflush. The main benefits of the Natural Gas Analyzer GC are simplicity, low cost, and the
ability to determine the water content of the gas.
The Natural Gas Analyzer GC uses just a single
and two columns, and is tolerant of valve
timing variations or operator adjustments.
Unlike the widely used competitive micro GCs, the
Natural Gas Analyzer GC is not only tolerant of water in
the sample gas, but it actually generates a quantifiable
water peak. The seven minute analysis may be longer
than a micro GC analysis, but the Natural Gas Analyzer
GC does not need baking out between runs. Therefore,
about the same number of runs may be made per day
with the Natural Gas Analyzer GC as with a typical
micro GC.
The chromatogram at right shows the separation of a
natural gas sample in less than seven minutes by an
Natural Gas Analyzer GC.
The Natural Gas Analyzer GC can be configured with a
only, for detection limits in the 200-500 ppm
range. Other detectors may be added, such as the
,
, or
for applications requiring higher sensitivity or selectivity.
8610-3070
Natural Gas Analyzer GC System
$10,809.00
(VOLTAGE: for 220VAC, use 8610-3070-2)
Options & Upgrades:
Additional
with
PeakSimple data system,
and
injectors, additional
additional
Natural Gas Analyzer GC System
17
|
|
|
|