488
M
MILLS
Continues
Model
CGM-20
Speed
30,000 RPM
Weight
14kg
Dimensions(mm)
W320xD300xH530
Power
AC110V/220V, 50/60Hz, 2Hp
CGM-20
Features:
●
Mineral substances, fiber and
adhesive substances.
●
Wind is used to cool the grinder for
continuous operation.
●
Size of particles: 150 mesh & above.
●
Ordinary herbal medicine:
0.6kg per 10 minutes.
●
Adhesive substances:
0.6kg per 15-20 minutes.
CGM-20,
Leading-Coming-Air Grinder
Inside
Back
Model
CCM-20
CCM-15
CCM-10
Speed (rpm)
3600
Type
Floor cut mill
Table cut mill
Motor
2HP
1.5HP
1HP
Weight (kg)
85
70
25
Cap size (mm)
W240xL120
W180xL100
W70xL110
Power
220V, 50/60Hz
110V/220V
50/60Hz
Features:
The vertical crushing machine uses the traditional grinding method to break
the sample. It’s designed to use the centrifugal force of the motors tungsten
carbide blade to achieve high crushing efficiency. Input volume is
adjustable. It is suitable for laboratory purpose.
CCM-10
CCM-15/20
CCM-10/15/20, Vertical Crushing Machine
Sieves:
Interchangeable sieves for
insertion into the grinding
heads ensure maximum
particle size filtering.
Sieves included
0.3mm 2pcs.
0.4mm 1pcs.
0.5mm 1pcs.
3mm 1pcs.
8mm 1pcs.
13mm 1pcs.
●
Suitable for fine grinding and coarse crushing. Not to
be used with wet, greasy, sticky, fibre rich materials.
●
Continuous operation.
●
Easy replacing mesh sieves.
●
Up to 6 different mesh sieves
●
Grinding particle size. Not bigger than 30mm.
●
Size after grinding 0.3 - 13mm.
Sieves
included:
●
Capacity 3-5kg/hour.
●
Power supply, NH-34-34S: AC100V 50/60Hz
NH-20/3 phase 200V.
●
The processing hammer is made of Tungsten.
●
Stainless steel tank, inner funnel aluminium,
outer funnel stainless.
●
Blades speed 3600 RPM.
Knives
included:
Knives included
12-4, Center
12-1, Straight blade
Use for the materials in general, fiber, & tough quality such
as pearl, gentian & liquorice
12-3
Big curve blade
Use for the materials in powder, fiber, & viscosity quality such
as gentian & medlar
12-2
Medium curve blade
Use for the materials that straight blade can not pulverize.
Or when use the big curve blade but can not achieve the
tiny powder, use this blade
In
Out
In
Out
In
Out
12-4
Center 12-3 12-2 12-1
