14 / 44
PRINTED IN CANADA
Phone: 418 755-1319 • Fax: 418 755-1329 •
info@ldetek.comwww.ldetek.com
©Copyright 2013 LDetek inc.
271 St-Alphonse Sud, Thetford Mines, (Qc), Canada, G6G 3V7
Where
innovation
leads to
success
CARRIER GAS
Argon and Helium
POWER
80 to 240 VAC, 50-60 Hz
GAS CONNECTIONS
1/16” (can be customized)
OPERATION OUTLET PRESSURE
Atmospheric or Vacuum
OPERATING TEMPERATURE
10°C to 50°C (in stable environment)
FILTER
10u SS particle filter on the gas inlet
DETECTOR SIGNAL OUTPUT CONNECTION
BNC Coaxial type (can be customized)
POWER CONSUMPTION
max 10 Watts
SPECIFICATIONS:
Adjust the amplification directly on the source light of the plasma to change the measurement scale of the detector.
PPB to % application can be achieved with the same detector.
Signal Polarity:
negative peaks can now be inverted to get positive peaks.
Filtering:
Digital filtering can be applied to improve signal provided to the GC.
Gain:
adjust the gain of the signal for the specific measurement.
Output voltage:
set the output voltage scale that fits to the GC signal acquisition system.
Zero baseline:
set and perform zero baseline directly in the detector.
Connect up to 8 detector to the same plasma controller.
Diagnostic tool:
Graphic tool to trend the raw or the output voltage.
Peak Table:
edit a peak event table to change all possible parameters at specific time analysis can be started manually
or by digitally and the detector will follow your specific configuration.
Maintenance menu: all tools to troubleshot the detector is provided.
PLASMADETEK CONFIGURATOR:
1
1
2
8
9
10
4
3
3
5
6
7
2
3
4
5
6
7
8
9
10