• 15 •
2003
Volume 3
800-356-1688
Description
qty.
cat.#
RethreadingTool for
1
/
16
" compression fitting
ea.
23016
RethreadingTool for
1
/
8
" compression fitting
ea.
23017
RethreadingTool for
1
/
4
" compression fitting
for Agilent split/splitless injection ports
ea.
23018
RethreadingTool for
7
/
16
" compression fitting
for Varian injection ports
ea.
23019
RethreadingTool for
1
/
4
"
Varian-style capillary column fittings
ea.
21893
✔
Achieve a better seal.
✔
Repair worn or damaged threads.
✔
Built-in guide, to prevent cross-threading.
The inlet seal at the base of a
split/splitless injector forms a
seal between the injection port
and the inlet liner. This inlet
seal wears over time andmay
become scratched or pitted,
which compromises the seal-
ing ability of the injector. Use
the Restek injection port
repair tool to easily resurface
the inlet seal and remove con-
taminants; it saves time and
money by preventing leaks.
by Brad Rightnour andMichael Goss, Instrument Innovations Team
For Easier GC
Maintenance Try These
Tools fromRestek
tools
✔
Four scoring edges for cutting fused silica tubing, four
serrated edges for cuttingMXT
®
metal capillary columns.
✔
Sure-grip handle included.
Due to constant installation,
removal, and exposure to
extreme temperature changes,
threadsonGCpartsbecome
worn anddamaged. This can
cause apoor seal, andoxygen
can enter the system, compro-
mising analytical results and
possiblydestroying expensive
analytical columns.
Screw the rethreading tool
completely onto the injection
port in a clockwise direction.
Unscrew the rethreading
tool and inspect the threads.
Repeat as necessary.
✔
Resurfaces critical inlet seal areas.
✔
For Agilent split/splitless injection ports.*
Description
qty.
cat.#
Ceramic ScoringWafers
5-pk.
20116
Check the cut against the
white of the scoringwafer.
Look for a clean, square
cut.
Hold the scoringwafer at a
45° angle to the tubing. Use
gentlepressure and a
smooth, perpendicular stroke.
Description
qty.
cat.#
Injection Port RepairTool
ea.
21393
Replacement SandingDisks
(5 fine& 5medium)
10-pk.
22689
Try Our Exclusive
™
-Treated Injection Ports
Formore information, request newly updated
GenuineRestekReplacement Parts for Agilent GCs
(lit. cat.#59627D)
Ceramic ScoringWafers
—Clean, square cuts for better connections
Rethreading Tool
—Save the cost of replacing expensive injectors
Injection Port Repair Tool
—Remove contaminants, achieve a better seal
Injection port bore cleaner
Alumnium oxide sanding disk resurfaces
critical seal at base of injector
*Should not be used on Siltek
™
-treated injection ports.