RESTEK Advantage
2003
Volume 2
Note: All seals include washers.
Note: The 1.2mm inlet seal is recommended for use with Vespel
®
/graphite ferrules or when installing two columns using a two-hole ferrule. The 0.8mm inlet seal
is recommended for use with graphite ferrules and single capillary column installation.
Vespel
®
Ring Inlet Seals with Washers for Agilent 5890/6890/6850 GCs
Vespel
®
Ring Inlet Seals are
available in three finishes: gold-plated,
Silcosteel
®
-treated, or stainless steel.
0.8mm ID Vespel
®
Ring Inlet Seal
2-pk.
10-pk.
Gold-Plated
21562
21563
Silcosteel
®
21564
21565
Stainless Steel
21560
21561
1.2mm ID Vespel
®
Ring Inlet Seal
2-pk.
10-pk.
Gold-Plated
21568
21569
Silcosteel
®
21570
21571
Stainless Steel
21566
21567
Replacement Inlet Seal Washers
Description
Similar to Agilent part #
qty.
cat.#
Replacement Inlet Seal Washers
5061-5869
15-pk.
21710
Replacement Inlet Seals for Agilent GCs
• Special grade of stainless steel that is softer and deforms more easily, ensuring a leak-free seal.
• Increases column lifetime because oxygen cannot permeate into the carrier gas.
• Reduced noise benefits high-sensitivity detectors (e.g., ECDs, MSDs).
• Silcosteel
®
seal offers the inertness of glass.
• All seals include washers.
*0.8mm ID stainless steel inlet seal is equivalent to Agilent part #18740-20880, 0.8mm ID gold-plated inlet seal is equivalent to Agilent part #18740-20885.
Single-Column Installation,
0.8mm Opening*
0.25/0.32mm ID Dual-Column Installation,
1.2mm Opening
0.53mm ID Dual-Column Installation,
1
/
16
-inch Opening
2-pk.
10-pk.
2-pk.
10-pk.
2-pk.
10-pk.
Stainless Steel Inlet Seal
21315
21316
20390
20391
20392
20393
Gold-Plated Inlet Seal
21317
21318
21305
21306
—
—
Silcosteel
®
Inlet Seal
21319
21320
21307
21308
—
—
Restek inlet seals feature a
super-smooth surface
for better chromatography!
• Low torque, soft seal, reduces wear, prevents damage at critical seal: no unexpected downtime
• Leak-tight connections, for greater sensitivity (less detector noise) and longer column life (no phase oxidation)
Vespel
®
Ring Inlet Seals
Lit. Cat. # 59523
2003 Restek Corp.
Please direct your comments on this publication to Brett Tyson, Graphic Designer, at
btyson@restekcorp.comor
call 814-353-1300, ext. 2113.
Restek Trademarks:
CarboFrit, EZ-No-Vent, Integra-Guard,
MegaMix, Pinnacle, Plus 1, Precision, Press-Tight, Rtx,
Silcosteel, Siltek, Stabilwax, Sulfinert, Uniliner, Vu2 Union,
Restek logo.
Other Trademarks:
Agilent (Agilent Technologies, Inc.),
Cellosolve (Union Carbide Corp.), FocusLiner (SGE), KEL-F (3M
Co.), Teflon (E.I. du Pont de Nemours & Co., Inc.), Tenax
(Enka Research Institute Arnhem), TRACE (Thermo Finnigan),
Vespel, Viton (E.I. du Pont de Nemours & Co., Inc.).
Restek USA
:
Phone: 800-356-1688 or 814-353-1300 • Fax: 814-353-1309 •
www.restekcorp.com110 Benner Circle, Bellefonte, PA 16823
Restek France
:
Phone: 01 60 78 32 10 • Fax: 01 60 78 70 90 •
restekfr@club-internet.frRestek GmbH
:
Phone: 49 06172 2797 0 • Fax: 49 06172 2797 77 •
RESTEK-GMBH@t-online.deRestek Ireland
:
Phone: 44 28 9081 4576 • Fax: 44 28 9081 4576 •
restekeurope@aol.comThames Restek UK Ltd
:
Phone: 01494 563377 • Fax: 01494 564990 •
Sales@Thamesrestek.co.ukFREE
Vespel
®
Ring Inlet Seals.
See Page 19.
-INT