• 11 •
www.restekcorp.comChromGas Hydrogen &
N
2
LC/MS Generators
The Best Value in Laboratory Gas Generators
✔
No high-pressure cylinders means improved lab safety.
✔
Ultra-high purity for better chromatography.
by Gary Barone, GC Accessories Product Marketing Manager
Restek has developed a marketing alliance with
Parker Hannifin Corporation, Filtration and
Separation Division—formerly Whatman—to offer
gas generators world-wide. Parker Hannifin now
provides the best value in laboratory gas generators.
The ChromGas fuel-grade hydrogen generator is a
hazard-free alternative to high-pressure gas cylin-
ders. The ChromGas generators use an exclusive
solid polymer electrolyte to produce hydrogen on
demand. Deionized water and an electrical supply
is all that is needed to generate hydrogen for weeks
of continuous operation.
With an output capacity up to 500cc/min., this gen-
erator can supply 99.9995% pure hydrogen to over
ten gas chromatographs (GCs). Based on cylinder
gas savings alone, a ChromGas hydrogen generator
pays for itself in less than a year.
The Parker ChromGas hydrogen generators are cer-
tified for laboratory use by Canadian Standards
Association (CSA), Underwriters Laboratories (UL),
and International Electrotechnical Commission
(IEC) 1010. A built-in sensing circuit shuts the gen-
erator down if a hydrogen leak is detected.
Nitrogen Generator and Air Compressor All
in One—Ideal for LC/MS!
The Parker N2-15 generator incorporates an oilless
air compressor and membrane nitrogen generator
assembled as a package specifically to feed LC/MS
systems. The N2-15 produces 15 liters-per-minute
at 99% purity. The N2-15 generator is an ideal,
safe, and less expensive long-term alternative than
nitrogen cylinders or bulky dewars.
The N2-15 generator is a convenient, inexpensive
solution to high-volume nitrogen generation.
Previously a compressor and generator would have
to be purchased separately. Often the end-users
were responsible for installing and interfacing the
compressor and generator. The cost of a reason-
able system was well in excess of $20,000. Now the
N2-15 generator solves the installation and set-up
difficulties at a very attractive price.
✔
Hydrogen Generators
Model #
Capacity
cat.#
A9090
90 cc/min
22033
A9150
150 cc/min
22034
B9200
250 cc/min
22035
B9400
500 cc/min
22036
✔
Replacement deionizer bags and
desiccant cartridge for Models
A9090, A9150, B9200, and B9400
Deionizer bag: cat.# 21670, (ea.)
Desiccant cartridge: cat.# 21671, (ea.)
✔
Model N2-15 generator
cat.# 22037, (ea.)
✔
Rtx
®
-5 Amine
(fused silica) Crossbond
®
5% diphenyl/95% dimethylpolysiloxane; Stable to 340°C
ID
df (µm)
temp. limits
15-Meter
30-Meter
0.25mm
0.50
-60 to 300/315°C
12335
12338
1.00
-60 to 300/315°C
12350
12353
0.32mm
1.00
-60 to 300/315°C
12351
12354
1.50
-60 to 290/305°C
12366
12369
0.53mm
1.00
-60 to 290/305°C
12352
12355
3.00
-60 to 280/295°C
12382
12385
✔
Base-Deactivated Inlet Liners
for amines and basic compounds
Restek stocks the most requested base-deactivated liners for immediate delivery. However, if you do not see the liner you need,
orders can be placed by adding the appropriate suffix number: each (-210.1), 5-packs (-210.5), and 25-packs (-210.25).
For base-deactivated liners packed with base-deactivated wool: each (-211.1), 5-packs (-211.5), and 25-packs (-211.25).
Base-Deactivated Inlet Liners for Agilent GCs
each
5-pk.
25-pk.
4mm Split Straight with Wool
20781-211.1
20782-211.5
20783-211.25
Cyclosplitter
®
20706-210.1
20707-210.5
—
4mm Splitless Straight
20772-210.1
20773-210.5
—
2mm Gooseneck
20795-210.1
20796-210.5
20797-210.25
4mm Gooseneck
20798-210.1
20799-210.5
20800-210.25
Base-Deactivated Inlet Liners for Varian GCs
each
5-pk.
Splitter with Wool
20792-211.1, (ea.)
20793-211.5, (5-pk.)
Frit Splitter
20715-210.1, (ea.)
20716-210.5, (5-pk.)
Inlet Supplies
Guide
We’ve updated
and expanded the
convenient, pock-
et-size guide. This
highly-requested
booklet details
Restek’s extensive
selection of liners
and other inlet supplies—organized by
GC manufacturer. Request your free
copy today! (lit. cat.# 59893A)