1-800-356-1688 or 1-814-353-1300
www.restek.com513
REFERENCE STANDARDS |
ENVIRONMENTAL
Hydrocarbons
Hydrocarbons, Polycyclic Aromatic
(PAHs),
cont.
Aviation Gas
Hydrocarbons, Petroleum
Fuels & Products
Miscellaneous,
cont.
Hydrocarbons, Petroleum,
cont.
Fuels & Products,
cont.
Creosote Oil
Fuel Oil
BTEX
See
page 484.
Diesel
See
pages 484–485.
Acenaphthene-d10 (15067-26-2)
Chrysene-d12 (1719-03-5)
1,4-Dichlorobenzene-d4 (3855-82-1)
Naphthalene-d8 (1146-65-2)
Perylene-d12 (1520-96-3)
Phenanthrene-d10 (1517-22-2)
SV Internal Standard Mix
(6 components)
Each
15-pk.
25-pk.
2,000 µg/mL each in methylene chloride, 1 mL/ampul
31206
31206.15
31206.25
4,000 µg/mL each in methylene chloride, 1 mL/ampul
31006
31006.15
31006.25
Acenaphthene-d10 (15067-26-2)
Chrysene-d12 (1719-03-5)
1,4-Dichlorobenzene-d4 (3855-82-1)
1,4-Dioxane-d8 (17647-74-4)
Naphthalene-d8 (1146-65-2)
Perylene-d12 (1520-96-3)
Phenanthrene-d10 (1517-22-2)
Revised SV Internal Standard Mix
(7 components)
2-Fluorobiphenyl (321-60-8)
Nitrobenzene-d5 (4165-60-0)
p
-Terphenyl-d14 (1718-51-0)
B/N Surrogate Mix (4/89 SOW)
(3 components)
2-Fluorobiphenyl (321-60-8)
Nitrobenzene-d5 (4165-60-0)
p
-Terphenyl-d14 (1718-51-0)
Pyrene-d10 (1718-52-1)
Revised B/N Surrogate Mix
(4 components)
50,000 µg/mL in P&T methanol, 1 mL/ampul
cat.# 30207 (ea.)
Aviation gas (8006-69-1)
Aviation Gas Standard
100-octane, low-lead fuel used in piston-type aircraft.
50,000 µg/mL in methylene chloride, 1 mL/ampul
cat.# 31838 (ea.)
Creosote oil (8001-58-9)
Creosote Oil Standard
• For total petroleum hydrocarbon pattern recognition of
creosote oil.
• High concentration—50,000 µg/mL in methylene chloride.
Creosote oil, a widely used wood preservative produced by
distilling coal tar, contains chemicals that are classified as
carcinogens (e.g., benzo(a)pyrene).
5,000 µg/mL in methylene chloride, 1 mL/ampul
cat.# 31216 (ea.)
50,000 µg/mL in methylene chloride, 1 mL/ampul
cat.# 31244 (ea.)
Fuel oil #4 (68476-31-3)
Fuel Oil #4 Standard
Fuel oil #4 is typically used in limited applications in which
the fuel cannot be preheated prior to burning. The fuel is a
blend of distillate (fuel oil #2) and residual (fuel oil #6) to meet
ASTM viscosity specifications. The fuel oil #4 used to prepare
this mixture has a kinematic viscosity of 21.9 at 38 °C (100 °F),
measured using ASTM D-445.
Each
15-pk.
25-pk.
2,000 µg/mL each in methylene chloride, 1 mL/ampul
31885
31885.15
31885.25
4,000 µg/mL each in methylene chloride, 1 mL/ampul
31886
—
—
Each
15-pk.
25-pk.
1,000 µg/mL each in methylene chloride, 1 mL/ampul
31024
31024.15
31024.25
5,000 µg/mL each in methylene chloride, 1 mL/ampul
31062
31062.15
—
5,000 µg/mL each in methylene chloride, 5 mL/ampul
31086
—
—
5,000 µg/mL each in methylene chloride, 10 mL/ampul
33028
—
33028.25
Each
15-pk.
1,000 µg/mL each in methylene chloride, 1 mL/ampul
31887
31887.15
5,000 µg/mL each in methylene chloride, 1 mL/ampul
31888
31888.15
5,000 µg/mL each in methylene chloride, 5 mL/ampul
31889
—
Reference Standards
Documentation Search
Search by cat. # or lot #
• SDSs
• Certificates
• Data packs
www.restek.com/ documentation