SyringeHeaterKit
Description forHEATER-KIT-1LG:
Heating device for syringes that requires temperature-controlled dispensing. Heats up to 185°C.
CompatibilityNotes:
Please contact us at 631-249-1392or
about pump compatibilitywhen heating syringes above
100°C. Customizationmay be required.
If you are in a countrywhere the voltage is above 120V, youmust purchase a step-down transformer with theHeater Kit.
Digitally set the heater set point
Temperature sensor in heating pad
Set point and other parameters retained inmemory
Controller will heat the syringe and hold the set temperatureusing anon/off or Thermo-kinetic control algorithm.
Multiple syringeheater pads canbe attached to the control unit, under restricted conditions.
Heated syringe can bemounted on a syringe pump. Please call 631-249-1392 for compatibility.
Dual temperature sensors in primaryheatingpad.
Heater Kit includesControl-Unit power cableandPrimary-Syringe-Heater-Pad.
Description forHEATER-PAD2-1LG:
For attaching a secondheating pad toHEATER-KIT-1LG. Temperature is sensed in primaryheating padonly.
CompatibilityNotes:
Heater padmeasures 75mm x 75mm
Each syringe heater control unit uses only theprimaryheating pad to sense temperature. All secondaryheater pads con-
nected to that control unit functionaccording to temperature at the primaryheater pad. Careful consideration should be
takenwhen using secondary/slave heater pads. For different temperatures or variableenvironments, use separate control
unitswith primaryheater pads.
Pluggingmore than12Syringe-Heater-Pads onto oneController is not recommended
Description forHEATER-PAD3-1LG:
For attaching additional, up to12 total, heating pads toHEATER-KIT-1LG
withHEATER-PAD2-1LG
Temperature sensed in primaryheatingpadonly
NewEraPumpSystems, Inc.
**Not ForClinical UseOnHumans**
Model: HEATER-KIT-1LG
Model: HEATER-PAD2-1LG
Model: HEATER-PAD3-1LG
13
