98
CALIBRATION
They’re the smallest, lightest & most portable dry-wells in the world. It’s
convenient. vI has a range to 300°C and is perfect for checking RTDs,
thermocouples and bi-metal
thermometers in the field.
Plug it in, switch it on, set the temperature with the
front panel buttons and insert your probe into the
properly sized well.
Compare the reading of your device to the display
temperature, and the difference is the error in your
device.
The Cali 350 has a display resolution of 0.1 degrees, an accuracy of ±1°C, a
stability of ±0.3°C.
Model
CALI-350
Range
35°C to 300°C
Accuracy
±1°C
Stability
±0.3°C
Heating times
15 Minutes
Well depth
100mm
Power
230V/60Hz
Size (mm)
H57xW125xD150
Weight
3 kg
CALI-350, Portable Dry-Well Calibration, Up To 300
°
C
3/16”
3/8”
1/8”
1/4”
The Portable Thermocouple calibrator is
a high stability heat source designed for
the calibration of thermocouples up to
7.5mm, with a maximum operating
temperature of 1200°C. Thermocouples
CALI-1200 , Thermocouple Calibration Furnace 400 - 1200
°
C
Model
CALI-1200
Max. temperature (°C)
1200
Continuous temperature (°C)
1150
Temperature range (°C)
400-1200
Stability
Better than +1°C
Overall dimensions (mm)
W310xD225xH399
Heated length (mm)
150
Controller
eurotherm 2132
Indicator
eurotherm 2132
Heating rate
20 mins (to 1150°C)
Cavity diameter (mm)
20
Weight (kg)
8.8
Furnace voltage
120/240 externally selectable
Max. power (W)
1100
Thermocouple type
N
CALI-1200
WBL-102
WBL-102, Temperature Calibration
Water Bath -30 - 100°C
MRC Temperature Calibration Bench
top Bath covers a range from -30°C
to 100°C with stability & uniformity of
± 0.1C. tank volume is nine Liter-large
enough to test many sensors at once.
Bath opening is 200 x 150 mm, and 150
mm deep.
Using high precision PID microprocessor
controller Eurotherm model 3216 with
high stability RTD sensor.
With optional RS-232 communication
to control the bath from a PC.
are inserted into the work tube through an insulation plug & can be compared with the temperature indicator. It is
portable and self contained, with built in PID microprocessor controller & separate digital temperature indicator giving
1°C resolution. The special work tube design results in a much higher temperature uniformity than is normally associated
with a furnace of this size. The metallic work tube is earthed for operator safety when used with metal sheathed
mineral insulated thermocouples. The CALI-1200 can be used in a laboratory or in site as its rapid heat up and
stabilization make it ideal for quick set up. With optional RS-232 communication to control the bath from a PC.
OBH-183
OBH-183, Temp. Calibration Oil
Bath Up To 300°C
CALI-350
Model
OBH-183
Temp. range
Room temp. +5°C to 300°C
Stability
±0.1°C
Setting/readout
Digital
Heater
1.2KW
Stirring
By built-in circulation pump
Inside DIM.
W30xD30xH20cm
Outside DIM.
W66xD40xH39.5cm
Volume
18L
Power source
110/220V 50/60Hz, 13A/6.5A
Temperature
C
