100
CALIBRATION
C
Temperature/Pressure
CALI-1200HN
High Temperature Ceramic Dry Block: Calibrator. Stable High (1200°C) Temp.
Source for Calibration of Multiple Sensors (up to 6) at High Temperature.
●
Range: 300°C above ambient to 1200°C.
●
Stability: Better than ±0.5°C (below 600°C).
●
Accuracy: Better than ±3°C. Resolution: 1°C.
●
Size: W205xD365xH480mm. Weight: 13kg.
●
Well Depth - 150mm.
●
High Stability.
●
RS - 232 Interface.
●
Multi-Hole 1 Interchangeable (Thermowell) Inserts - to suit.
●
High Accuracy.
●
Auto - Tune PID Control. Semi Portable.
CALI-1200HN, High Temperature Calibrator
CALI-1500HN
Very High Temperature Ceramic Dry Block: Calibrator
●
Temperature Range: 500 to 1500°C.
●
Stability: ±2°C.
●
Accuracy: ±0.5% of Span. Resolution: 1°C.
●
Size: W345xD510xH830mm ( with wheel).
●
Fast, Stable & Accurate. Auto-tune PID Controller.
●
Heating Element: Silicon Carbide.
●
Dry Block: - High Alumina Ceramic
●
Single (Interchangeable) & Multi Hole (Fixed).
●
Immersion Depth - 250mm.
●
Interchangeable Single Hole Thermowells-ID 7/11 & 15 mm*.
●
Semi Portable - Castor Wheels. RS-232 Computer Interface.
CALI-1500HN, Very High Temperature Calibrator
CALI-FB600L
Fluidised bath switch test facility.
●
Ideal for calibration of Multi Type add shaped sensor.
●
Temperature Range: RT+20 to 600°C.
●
Stability: ±0.5°C.
●
Accuracy: ±1.5°C. Resolution: 1°C.
●
Size: W730xD470xH780mm.
●
Fast, Stable & Accurate.
●
Immersion Depth - 250mm/400mm.
●
Semi Portable - Castor Wheels optional.
●
RS-232 Computer Interface.
CALI-FB600L, Temperature Calibrator
CALI-PP
PP: Ranges: -0.85 to 2/7/10/20 Bar PPH : Ranges: -0 to 200/400 Bar
●
Temperature Range: 0 to 50°C (Automatic).
●
Accuracy: PP (± 0.05% F.S. + 1digit). PPH (± 0.025% F.S. + 1digit)
●
Size: L330xB230xH125mm for 2/7/10 bar. L330xB230xH175mm for 20 bar.
●
Advanced Microprocessor Based. Light Weight 1 Compact.
●
Trendy, Elegant ‘Rugged’ Case - Truly Portable.
●
Resolution: Minimum 5 digits. Large Graphic Display.
●
Touch Membrane Keypad with 15 Selectable Pressure Units eg
mbar, bar, Kg/cm², Psi, in Hg, mm Hg, mm H
²
O, cm H
²
O, m H
²
O, in H
²
O,
ft H
²
O, Pa, MPa, KPa, atm.
●
DC Current Measurement: Active Loop: 50 mA, Passive Loop: 25 mA.
●
Switch test Capability & Zero Offset facility.
●
Audio & Visual Alarms for Over Pressure.
●
NI- MH Rechargeable Batteries with Low Battery Indication.
CALI-PP/PPH, Semi-Portable Pressure Calibrators
●
Pressure Transducer - All Media Compatible with SS316 .
●
Integral 1 In-Built Vacuum & Pressure Hand Pump, Vernier Adjustment & Release Valve .
