696
WASHERS
W
Water Treatment
To obtain high quality washing standards, it is fundamentally important to used correctly treated
water. In the prewash, washing and neutralization phases, softened water should always be used.
Models WG-2045, WG-1060, WG-4060, WG-3060 and WG-4090 range have an efficient built-in
decalcifier capable of reducing the hardness of the supply water so as to prevent the classic
formation of whitish stains inside the chamber and on the instruments.
MRC also supplies a range of high-performance WS water softeners which are compact and easy to
install. Equally important is the rinsing of the instruments with demineralized water in order to eliminate
any contaminants remaining in the washing chamber. For this purpose, MRC has the compact and
efficient WP3000 mixed resin bed demineralizer.
Water Treatment
WP3000
Resin column water purifier
The WP3000 water purifier is used to produce deionised
water at 0.8-1µS/cm, suitable for the final rinsing of
instrument washers. The system uses mixed bed resins
(disposable) which can also retain silica. When the resins
run out. they can simply be replaced with the MI700WP kit.
The resin cartridge is made out of stainless steel, as is the
entire machine.
Net capacity of cartridge: 15Liters.
Dimensions: I x d x h = 300x600x850mm.
MI700WP
Anion/cation mixed bed resins kit for the
WP3000 water purifier. Total exchange capacity 42700
Liters/
0
F
#
end of cycle at 5µS/cm (“Hardness in French
degrees). Supplied with used resin disposal bag.
WS9E, WS11E, WS14E, WS17E
Water treatment systems
The WSE Series of appliances are technological water
softeners capable of completely eliminating lime from
water.
The resins are regenerated using normal sodium chloride.
Available in versions with flow rates of up to 2700 Liters/
hour. The models are fitted with an electronically
controlled head which can be programmed
depending on the hardness of the water. They provide
backflow regeneration based on the volume of water
(bearing in mind the resin saturation rate) and proportional
brine in order to optimize water and salt consumption.
Model
WS9E
WS11E
WS14E
WS17E
Maximum flow rate
1600 l/h (16.7 l/h)
1800 l/h (43 l/h)
2000 l/h (43 l/h)
2200 l/h (43 l/h)
Nominal flow rate
1000 l/h (16.7 l/h)
1500 l/h (43 l/h)
1600 l/h (43 l/h)
1800 l/h (43 l/h)
Resin capacity in lltres
9
11
14
17
Exchange capacity (m
3
/
o
f)
54
66
84
102
Cycle capacity at 4
0
f
1350
1650
2250
2700
Programmable residual hardness
0-10
0
F
Regenerating agent type
NaCI Salt
Regenerating agent consumption
0.9 kg/cycle
1.0 kg/cycle
1.2 kg/cycle
1.8 kg/cycle
Dimensions
Ø
xH (mm)
300x470x540
300x470x660
300x470x815
300x470x1070
Salt tank dimensions L x P x H (mm)
Integrated
Capacity lltres (SALT)
About 15
About 20
About 30
About 40
Connections
1
#
