616
Shaking
Shaft
Shaking
Base
S
Rotating & Tapping/Vibratory Motion Shaker
SIEVES
Model
TSS-400
Rotation speed
246/291rpm
Size of sieve container
φ
200x60 Max. 8 pcs
Hammer Speed (up/down)
65/78rpm
Timer
“NO” or 0~60 min
Safety device
110V (FUSE 6A)/220V (FUSE 10A)
Power
110/220V, 50/60Hz
Weight
168Kgs
Dimension (mm)
D400xW750xL950
TSS-400, Sieve Shaker, Floor Type, Rotating & Tapping motion
TSS-400
Clapper
Sieve(s)
Fastening seat
Window for
Watching oil level
Timer
Screws for
Fastening
Purpose
●
Offers excellent separating and sieving performance.
●
Designed to install and remove sieves easily.
●
Heavy duty, stationary unit. Recommended for use in
testing applications requiring material 635 mesh (20
microns) and greater in size.
●
Rotating and tapping motions.
●
The tapping motion is given by hammer from top.
●
A 60 minutes timer.
●
Sieves, cover & bottom collecting pan are not included.
●
This shaker is heavy in construction & no special
Sieve:
Ø
200x60mm
Sieve:
Ø
200x60mm
Sieve:
Ø
300x60mm
TALS-200/300/400, Sieve Shaker
The TALS model is a multi-purpose sieve shaker that was
developed at our Company and incorporates many
improvements allowing it to handle most of the problems
that usually arise in sieving all kinds of materials. During
each development state special emphasis was put on
convenience of the laboratory operator.
The operating panel includes: power switch and
mechanical timer for up to 30 min. The sieves are fastened
to the device by rapid screws, a great time saver.
The transparent cover allows observing the course of
sieving.
Also the mechanical structure was highly enhanced to the
point that they increase the operating power by about
30%, while at the same time reducing the noise level.
The device is capable of operation in three modes:
sieving, shaking and bouncing and banging. The operating
power is adjustable.
Shaking: from 1000 to 3000 microns.
Bouncing: from 125 to 1100 amplitudes/min.
Banging: this action complements the bouncing and serves
to “free” the mesh from irregularly shaped particles that
plug up the sieve is the course of sieving.
Wet sieving is possible: liquids would be supplied through
the cover and slanting bottom with a drain for collecting
the liquid material.
The device is suitable for sieves from 8 to 200 mm (3”, 10
cm, 15 cm, 30 cm and 45 cm sieves may also be used).
Dimensions: width: 34 cm, length: 39 cm, height: 17 cm.
Total height, including the sieve holding head is 70 cm.
Weight: about 16 kg.
TALS-200
Shakers
Sieves
TALS-200
8” or 200mm
TALS-300
up to 300mm
TALS-400
up to 400mm
foundation is required.
●
The machine can
accommodate 7 test
sieves + set of
Lid-pan but is
supplied without
sieves.
TSS-400 shaker has excellent separating capabilities by rotating very gently. This heavy duty floor model product is
designed to produce rotating and tapping motion, with a continuous duty motor.
Transparent Lid Cover
