436
M
METERS
Pressure
PS-9302, Pressure Meter
●
Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new
calibration are not necessary when change the new sensor.
●
When
change the new pressure sensor, just select pressure type (2, 5, 10, 20,
50, 100, 400 bar) on the front panel button. The sensor type will memorize
into the circuit permanently by EEPROM.
●
8 kind pressure units (bar, psi, Kg/
cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere) select by push
button on the front panel.
●
Optional full line pressure sensor (2, 5, 10, 20,
50, 100, 400 bar) are available
●
Auto shut off saves battery life.
●
4 pin DIN
socket, 2 pins to provide DC 5 V exciting voltage (power supply) to
pressure transducer, another two pins for accept transducer signal of 100mV
full scale.
●
Zero button on the front panel, easy adjust the zero value of
pressure sensor.
●
Push button gain adjustment, usage for calibration
precisely if necessary.
●
Separate pressure sensor, easy operation. & remote
measurement.
●
Microprocessor circuit assures maximum possible accuracy,
provides special functions and features.
●
Super large LCD display with
contrast adjustment for best viewing angle.
●
Records maximum & minimum
readings with recall.
●
Data Hold function for stored the desired value on
display.
●
Built-in low battery indicator.
●
RS232/USB PC serial interface, can
match the personal computer used as the Datalogger, Pressure Recorder
and other modern pressure measuring system.
Model
PS-9302
Circuit
Microprocessor LSI circuit.
Display
61 mm x 34 mm supper large LCD display. 15 mm (0.6") digit size.
Display units
bar, psi, Kg/cm^2, mm/Hg, inch Hg, meter H2O, inch H2O, Atmosphere.
Accuracy
± (0.5% + 1d) * Under the signal from the sensor is at full scale (100 mV).
* Meter only. * Within 23°C± 5°C
Pressure transducer
Optional, exciting voltage DC 5V, Sensor max. range output is DC 100 mV.
Zero adjust
Push button on the front panel.
Span adjust
Push button gain adjustment, usage for calibration precisely if necessary.
Transducer mV input signal
Approx 100 mV (Full Scale).
Exciting output power supply
DC 5 V.
Data hold
By push button.
Data record
Records Maximum & Minimum readings.
Power Off
Auto shut off saves battery life, or manual off by push button.
Data Output
RS 232 PC serial interface.
Sampling Time
Approx. 0.8 second.
Data Output
RS 232/USB PC serial interface.
Operating Humidity
Less than 80% R.H.
Operating Temp.
0°C to 50°C (32°F to 122°F)
Power Supply
006P DC 9V battery (heavy duty).
Power Current
Approx. DC 8.5 mA.
Weight
345 g/0.76 LB
Dimension
180 x 72 x 32 mm (7.1 x 2.8 x 1.3 inch).
Standard Accessories
* Instruction manual: 1PC
optional Accessories
* Pressure sensor, PS100-xxBAR refer to the bottom description.
* Hard Carrying case (CA-06): 1PC * Data acquisition software , SW-U801-WIN
* RS232 cable, UPCB-01 * USB cable, USB-01
Description
* Optional, pressure sensor that cooperate with PS-9302.
* Out put : 100 mV DC for full scale.
* 4 pin DIN plug, 2 pins to accept DC 5 V exciting voltage (power supply) for
pressure transducer, another two pins for output signal of 100mV full scale.
Size : 30 mm dia. x 85 mm. Weight: 160 g.
Pressure Port Connector : PS 1/4" (19 teeth per inch) or 1/4" NPT
* Included one adapter connector that convert the 1/4" NPT to 1/4 " PS.
Optional Pressure
Sensors Models
2 bar sensor PS100-2BAR
5 bar sensor PS100-5BAR
10 bar sensor PS100-10BAR
20 bar sensor PS100-20BAR
50 bar sensor PS100-50BAR
100 bar sensor PS100-100BAR
400 bar sensor PS100-400BAR
PS-9302
+PS100-10BAR
