412
MATERIAL TESTING
M
Software:
Software of computerized serial
●
Setting testing condition and operate directly trough
computer.
●
Setting various testing mould, e.g. tension test,
compression test, bending test, peel test, creep test, test,
spring test, foam test, user defined test etc.
●
Various unit selectable: Unit is interchangeable between
Metric system and English system, also can set the
decimal place of each unit.
●
Force (kN, N, tonf [Sl, long, short], kgf, gf, lbf, ozf)
●
Length(m, cm, mm, ft, in)
●
Stress (GPa, MPa, kPa, Pa, kN/m
2
, N/m
2
, N/cm
2
, N/mm
2
,
kgf/mm
2
, gf/cm
2
, gf/mm
2
, lbf/ft
2
, lbf/in, kpsi, psi)
●
Time (min, sec, msec)
●
Speed (cm/min, cm/sec, mm/min, mm/sec, in/min,
in/sec).
●
Protection mode: Over load protection, over
displacement protection.
●
Display X-Y, X-T, Stress-Strain curve and data
synchronously.
●
Analyze data, statistics, save data by computer.
●
Connect with computer by USB.
Software of Electronic serial
●
Connect with computer by USB.
●
Setting various testing mould, e.g. tensile, compression,
bending, peel test etc.
●
Display X-Y, X-T, Stress-Strain curve and data synchronous.
●
Analyze data, statistics, save data by computer.
Model No.
UTM-507E
Load Capacity
100N (10kgf)
Stroke (w/o Grips)
300mm
Position Control Resolution
0.005mm
Max. Speed
500mm/min
Min. Speed
5mm/min
Speed Accuracy
±0.75%
Motor Style
Step Motor
Language
Chinese / English Selectable
Pc-Port
USB
Data Sampling Rate
2KHZ
Resolution Of Force
1/10,000
Load Cell Accuracy
±1.0%
Dimension
92x30x38 cm
Weight
36kg
Power Supply
100~240VAC, 3A
This machine is suitable for 180 degree peel test of
tape and electronic packing belt.
It can perform friction test and tensile test of small
force as well.
The horizontal type tester offers a better solution for
some special requirements that a vertical type tester
can not do.
UTM-507E Horizontal Tensile Tester
UTM-507E
10kg, Horizontal Tensile Testing Machine
