406
MATERIAL TESTING
M
HT/HB Series Digital Torque Meter
HT Series
HB Series
HT Series Digital Torque Meter is an intellectualized measure
instrument, which is specially designed for testing and
measuring different of torque. HT is main used for kinds
motorized or air screwdriver, torque screwdriver, torque
wrench, torque driver, measure and calibrate torque
testing,and parts fracture test.
It is widely applied in electric industry, machinery industry,
light industry, automobile industry, scientific research and so
on.
Specifications:
●
High accuracy and resolution
●
Peak hold function
●
Peak automatic clearance function
●
Tolerance limit(up and down limit)
●
Automatic power off function
●
3 units available: N.m, kqf.crn , Ibf.in
●
Reset acceleration of gravity function
●
Full range 150% overload
●
Large memory
●
Inductive background light
●
USB output
●
Match synchronous analysis software
Model
HT/HB-10
HT/HB-20
HT/HB-50
HT/HB-100
HT/HB-200
Capacity
1.0000N.m
2.0000N.m
5.00N.m
10.00N.m
20.0N.m
Resolution
0.0005N.m
0.001N.m
0.002N.m
0.05N.m
0.1N.m
Accuracy
±0.5%
Torque/Abrasion
The main function is to use specified Grinding Wheel with
specified Load to rub the surface of specimen, and after a
setup number of timer of abrasive, evaluate the following
conditions of the surface after test, and ratio the
endurance characteristic of abrasion for this material.
●
Worn out condition
●
The loss of the weight
●
The loss of
the physical volume
●
The thickness that been worn out,
etc.
●
Use NBS standard gum to ratio the endurance
characteristic of abrasion for this material.
Specification:
●
Machine Dimension: 33 ×43 ×30cm
●
Machine Weight: 30
kg
●
Power Supply: 240V 50Hz
●
Rotary Speed: 60RPM (Or
to be specified)
●
Counter: LCD display, 6Digit
(Optional Setting), Auto-Brake
●
Load (Weights) : 250g,
500g, 1000g (Free assorting by user)
●
Grinding Wheel
specification: (As customer specifies)
●
The cleft between
QC-619T, Abrasion Tester
QC-619T
Grinding Wheel and Specimen Plate-Holder: 37 ~ 38mm
●
Grinding Wheel: Diameter 2”, thickness 1/2”
●
Pitch of Left
and Right Grinding Wheel: 63.5mm
●
Specimen size:
Ø
100mm, center hole:
Ø
8mm, thickness: 0.5~3mm (Adjustable),
available for soft/hard material
●
Accessories: Vacuum cleaner 1Set, Specimen cutter 1Pc (A), Wrench 1Pc (K), Grind
Wheel 1Set (B), Sand Paper 5Pcs (C)
●
Attachment: Warranty Certificate, Instruction Manual each one piece.