398
MATERIAL TESTING
M
This type of Melt Flow Indexer is a new & affordable tabletop instrument that tests the melt mass-flow rate (MFR) & melt
volume-flow rate (MVR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc. This
test method is particularly useful for quality control tests on thermoplastics. MVR will be found particularly useful when
comparing materials of different filler content & when comparing filled with unfilled thermoplastics. The MFR can be
determined from MVR measurements provided the melt density at the test temperature & pressure is known. The tester
is far superior to all national and international standard of Melt Flow Rates requirements, including IS01133, ASTM D1238
& GBIT 3682 method A & B. High Accuracy The built-in microprocessor maintains temperature control to within ± 0.5°C,
with rapid ram-up to the set point. Extruded material is automatically cut off by the built-in scraper mechanism at
preset intervals, controllable to ± 0.1 second. Ease to operate! Testing Melt Flow Rate has never been so economical
or easy to do! The tester is supplied completely with the accessories & weights necessary for maintenance & operation.
Nothing else to buy-just plug it in & start a test.
MFI-400 Series, Melt Flow Indexers
Technical Parameters:
Operating temperature: 120°C-450°C
●
Temperature control accuracy:
≤
0.5°C
●
Temperature
display resolution: 0.1°C
●
Temperature rising time: <30 min
●
Power supply: 220V/50Hz or 110V/60Hz.
It allows for testing melt mass-flow rate (MFR)
according to the standards IS01133, ASTM 01238
method A. The clear multi-line LCD display &
tactile-feedback membrane keypad allows fast,
accurate inputting of test parameters and providing
continuous display of settings during testing.
MFI-400
MFI-400B
It allows for testing the melt mass-flow rate (MFR) and melt
volume-flow rate (MVR) according to the standards ASTM
01238, IS01133, with the additional function of printing the
test result by a built-in micro-printer.
MFI-400C Series
MFR and MVR, Loading the Weight
Automatically
MFR and MVR, Loading the Weight Manually
MFR and MVR, Loading the Weight Manually
MFI-400C
MFI-400C Software:
Two languages are provided: English and Chinese. MFI-400C Software has the functions of
setting parameters, constant temperature control, cutting sample, calibration, setting test time, displaying test datum
& result, calculating melt density, as well as checking & printing test datum. Password verify is necessary for some main
operations in case of mishandle.
It allows for testing the melt mass-flow rate (MFR)
and melt volume-flow rate (MVR), Melt density test
according to the standards ASTM 01238, IS01133.
The clear multi-line Touch screen allows fast,
accurate input of test parameters and providing
continuous display of setting during testing, printing
the test result by a micro-printer. With the additional
function of loading the Weight automatically.
It allows for testing the melt mass-flow rate (MFR) & melt
volume-flow rate (MVR), Melt density test according to the
standards ASTM 01238, IS01133. The clear multi-line Touch
screen allow fast , accurate input of test parameters and
providing continuous display of setting during testing, with
the additional function of printing the test result by a
micro-printer.
It allows for testing the melt mass-flow rate (MFR) according
to the standards ASTM 01238, IS01133. The clear multi-line
Touch screen allows fast , accurate input of test parameters
and providing continuous display of setting during testing.
MFI-400C1/2
Melt Flow
