297
F
FURNACES
Small Tube, 1000°C, 1200°C
Model
MTF-
10/15/130
MTF-
10/25/130
MTF-
12/25/250
MTF-
12/38/250
MTF-
12/25/400
MTF-
12/38/400
MTF-
12/38/850
Max. temp. (°C)
1000
1000
1200
1200
1200
1200
1200
Heat-up time (mins)
5
10
15
25
30
25
-
Tube length (mm)
150
150
300
300
450
450
900
Heated length (mm)
130
130
250
250
400
400
850
Outer
measurements
excluding tube
(mm - HxWxD)
+body length (mm)
360x200x223
150
265x150x175
150
375x370x375
300
430x370x375
300
430x450x375
450
430x450x375
450
430x900x375
900
*Uniform length
±5
°
C (mm)
30
45
60
90
100
130
600
Max. power (W)
Holding power (W)
400
100
400
100
700
200
1000
300
1000
200
1500
300
2800
Thermocouple type
K
K
N
N
N
N
N
Weight (kg)
3
3
10
15
10
15
-
Power supply
Single phase Single phase Single phase Single phase Single phase Single phase Single phase
MTF Series, Wire Wound Single Zone Tube Furnaces,
1000°C & 1200°C
Features:
●
1000°C or 1200°C maximum operating temperature
●
15mm, 25mm or 38mm heated tube inner diameters
●
130mm, 250mm, 400mm or 850mm heated tube length
●
Integral wire wound worktube
●
Control module, with furnace mounted directly on top
●
301 controller, with single ramp to set-point facility
●
Delayed start process timer function as standard
●
Horizontal tube configuration.
MTF 12/38/250
Continuous operating temperature is 100°C below maximum temperature. Holding power is measured at the
continuous operating temperature. *Uniform temperature lengths are measured with end plugs fitted.
Options:
●
Over-temperature protection (recommended to protect valuable
contents & for unattended operation)
●
Non-permeable inner worktube to contain modified atmosphere
●
Impervious inner worktube to protect against chemical attack or
damage from thermal shock
●
Insulation plugs & radiation shields to prevent heat loss & improve
uniformity (recommended for vertical use)
●
Gas injection & vacuum compatible tube end seal assemblies.
Starting with the compact MTF/9 through to the 850mm long MTF 12/38
850, these tube furnaces can be used by placing samples directly into the
heated (wire wound) worktube or optional accessory worktubes can be
used to protect the element or work with modified atmospheres.
MTF 10/15/130
Stand Options:
Blanked
Base
Wall
Bracket
L-stand: Vertical use
Horizontal Use
Separated Controls
(No Stand)
