• 15 •
800-356-1688
by Brad Rightnour andMichael Goss, Instrument Innovations Team
tools
For Easier GC
Maintenance Try These
NewTools fromRestek
Pre-CleanedSampleVials
Ready toUse for Volatiles Analyses
✔
Container, liner, and closure cleaned, assembled, and ready to use.
✔
Open-top caps.
✔
Teflon
®
-faced 0.125” silicone septa.
✔
Each case lot numbered.
✔
Available in clear or amber.
Mini Wool
Puller/Inserter
Awool plug that is incorrectly positioned or con-
taminatedwith finger oils can bemore hindrance
than help. This inexpensive little tool greatly simpli-
fies the chore of consistently placing contaminant-
free wool plugs in an inlet liner, and retrieving a
plug when its time to replace it. We suggest you
order several packages-or be ready to spend time
trying to find out who's borrowed yours.
cat.# 20114, (2-pk.)
Description
qty.
cat.#
20ml CLEARPre-Cleaned VOAVials
72-pk.
21798
20ml AMBERPre-Cleaned VOAVials
72-pk.
21799
40ml CLEARPre-Cleaned VOAVials
72-pk.
21796
40ml AMBERPre-Cleaned VOAVials
72-pk.
21797
new
MS Installation
Gauge
Easily pre-seat ferrules for
consistent installations in
Agilent 5973MS!
✔
Prevents damage to the column end
✔
Ensures leak-free connection
cat.# 21894, (ea.)
1
2
Place a 1cmplug of loosely boundwool in the liner.
Adjust its positionwith the puller/inserter tool.
Use the hooked endof the puller/inserter to retrieve
the plugwhen it’s time to replace it.
by Donna Lidgett, GCAccessories Product MarketingManager
1
2
3
4
Install the nut and ferrule onto
the column, then insert the
column through the installa-
tion tool, exposing several
centimeters at the exit end.
Tighten the nut.
Score and remove the
exposed end of the col-
umnmaking sure of a
clean, square cut, then
loosen the nut.
The ferrule will be
properly seated and
should remain in place
when light force is
applied. Install the col-
umn into the GC/MS
interface.
Usewith conventional 2mm ID or 4mm ID liners andmost other liner configurations, but not with
double gooseneck liners.
new
