![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0296.jpg)
294
www.restek.comGC ACCESSORIES |
GAS MANAGEMENT
Gas Management Supplies
Specifications:
Length:
21" (53.3 cm)
Diameter:
1.5" (3.8 cm)
Maximum Inlet Pressure:
1,000 psi (6895 kPa)
Maximum Recommended Flow:
500 mL/min
Pressure Drop from 120 psi (827 kPa)
inlet at a flow of 0-500 mL/min:
<0.20 psi (1.4 kPa)
Compression End Fittings:
1
/
8
" or
1
/
4
", stainless steel
Shipping Weight:
3.04 lb (1,300 g)
*Warning: Do not use with nitrogen containing more than 500 ppm of oxygen. If the
oxygen level in the stream exceeds 500 ppm, use an air purifier.
VICI® Mat/Sen® Gas-Specific Purifier Modules
• Replace separate oxygen, moisture, and hydrocarbon traps
with one multiple-bed purifier, specific for purifying helium,
hydrogen, nitrogen, or air.
• Reduce gas impurities from ppm to low ppb levels.
• Decrease baseline noise and increase GC-MS sensitivity.
• Prepurged with the specified gas to shorten downtime.
Performance for these purifiers is optimized by incorporating a
multiple-bed format that progressively lowers concentrations of
contaminants at each successive bed. VICI® Mat/Sen® purifiers
are guaranteed to produce gases that are purer than 99.9999%,
when supplied with gas of 99.995% purity, and are prepurged
with the specified gas to speed conditioning. Purifier capacity is
approximately four tanks of gas at 99.995% (50 ppm) purity, and
correspondingly longer for purer gases.
Please Note: We recommend using an indicating oxygen trap (e.g., cat.# 22029, pg. 287)
downstream from a VICI® Mat/Sen® purifier to continually ensure gas purity and indicate
absolute change-out time.
Dimensions:
21
"
x 1
1
/
2
"
(53.3 x 3.8 cm)
Gas Pressure Gauge Kit
• Use an in-line pressure gauge
to indicate when a thermal gas
purifier getter tube should be
replaced.
• Includes
1
/
8
"
tee and 0–100 psi
(0-689 kPa) gauge.
Description
qty.
cat.#
price
In-line Gas Pressure Gauge Kit for Thermal Gas Purifiers
kit
21657
21657
22820
21610
22800
22064
23031
23032
Replacement Chemical Traps and Parts
for Agilent GCs
• Easy to install.
• Attach to same fittings as original manufacturer’s equipment.
• Built-in frits retain fine particles; adsorbents remove both
moisture and hydrocarbons.
Compression Tube Fittings
Gas-Specific
1
/
4
-inch
1
/
8
-inch
Purifier Module
qty.
cat.#
price
qty.
cat.#
price
Helium Purifier Module
ea.
22600
ea.
22601
Hydrogen Purifier Module
ea.
22602
ea.
22603
Nitrogen Purifier Module*
ea.
22604
ea.
22605
Air Purifier Module
ea.
22606
ea.
22607
Description
Similar to
Agilent Part # qty.
cat.#
price
Replacement Split Vent Trap
for Agilent 6850/6890 GCs
G1544-80550 ea.
22820
Replacement Chemical Trap
for Agilent 5890 GCs
05890-61260 ea.
21610
Split Vent Line (32-inch) for Agilent GCs
Includes: all installation hardware
2-pk.
22800
O-Rings for Agilent Trap Fittings
5180-4181 25-pk.
22064
Optional Split Vent Trap Assembly
for Agilent 6850/6890 GCs
G1544-60610,
G1544-80530 kit
23031
Replacement Traps (2) and O-Rings (4)
G1544-80530,
5188-6495
kit
23032