239 / 628
www.restek.com
237
GC ACCESSORIES |
INSTRUMENT SUPPLIES
Supplies for Agilent GCs: Inlet
Inlet Wrench
for Agilent 5890/6850/6890 GCs
• Use to remove the septum nut and weldments during GC
maintenance.
• Use the smaller end to remove the septum nut.
• Use the larger end to tighten the split/splitless weldment nut.
• High-quality stainless steel construction.
• Meets original equipment performance.
22065
Injection Port Repair Tool
for Agilent Split/Splitless Injection Ports
• Remove contaminants, achieve a better seal.
• Cleans critical inlet seal areas.
21393
injection port
bore cleaner
aluminum oxide
sanding disk (cleans
critical seal on base of
injector)
Description
qty.
cat.#
price
Injection Port Repair Tool
for Agilent Split/Splitless Injection Ports (includes: a handle
and brush adaptor, 5 medium sanding disks, 5 fine sanding
disks, a 6.5 mm bore brush, & a 7 mm bore brush)
ea.
21393
Replacement Sanding Disks (5 fine & 5 medium)
10-pk.
22689
Replacement Bore Brushes (one 6.5 mm & one 7 mm)
2-pk.
21353
Rethreading Tool
for Agilent Split/
Splitless Injection Ports
Worn and damaged threads can allow
oxygen into the system—compromis-
ing analytical results and destroying col-
umns. The built-in guide helps prevent
cross-threading.
Description
qty.
cat.#
price
Rethreading Tool
ea.
23018
Inlet Maintenance Kit
for Agilent GCs
• Includes the most common consumable GC supplies
and tools.
• All parts meet or exceed performance of instrument
manufacturer’s parts.
• Parts list makes reordering easy.
Inlet kit includes:
• 0.4, 0.5, and 0.8 mm ID graphite ferrules
• Viton® O-rings
• Capillary nuts
• Inlet seals
• Reducing nut
• Scoring wafer
• 11 mm Thermolite® septa
• 4.0 mm single taper liner
• 4.0 mm split liner with wool
• Capillary column caps
•
1
/
4
" x
5
/
16
" wrench
• Septum puller
• Installation gauge
• Wire cleaning brush
• Jet reamers/ferrule removers
• Inlet liner removal tool
• Septa nut removal tool
Description
qty.
cat.#
price
Inlet Maintenance Kit
kit
22181
22181
Repair damaged injection
port threads!
23018
Screw the tool completely onto the
injection port in a clockwise direction.
Unscrew the tool and inspect the
threads, repeat as necessary. When
done, wipe threads with methanol to
remove any debris.
Description
Similar to
Agilent Part # qty.
cat.#
price
Inlet Wrench
for Agilent 5890/6850/6890 GCs
19251-00100 ea.
22065