Rtx015-16-628

487 / 629

485
REFERENCE STANDARDS | ENVIRONMENTAL
Diesel Fuel, Disinfection By-Products, Drinking Water Odor, Ethylene Oxide
Diesel Fuel, cont.
Restek Offers a Full .
Line of Certified .
Reference Materials
so See .
5,000 µg/mL each in hexane, 1 mL/ampul
cat.# 31682 (ea.)
Diesel fuel #2 composite (68334-30-5)
Motor oil (64742-65-0)
Diesel #2/Motor Oil (2 components)
5,000 µg/mL each in hexane, 1 mL/ampul
cat.# 31676 (ea.)
Diesel fuel #2 composite (68334-30-5)
Mineral oil (8042-47-5)
Diesel #2/Mineral Oil (2 components)
5,000 µg/mL each in cyclohexane, 1 mL/ampul (prepares 8 mL of 1.25 µg/µL calibration curve
high point). Total hydrocarbon concentration is 10,000 µg/mL.
cat.# 31630 (ea.)
Diesel #2 (additive-free) (68334-30-5)
Mineral oil (additive-free [i.e., USP grade] bp 325–460 or C18–C32 retention time range)
(8042-47-5)
ISO/DIS 9377Water Quality Testing
(German H-53)
Reference mixtures for ISO/DIS 9377 (German H-53), a gas
chromatography–flame ionization detection (GC-FID) method.
Standard Mixture Stock Solution (2 components)
• For GC analysis of total petroleum hydrocarbons (TPH)
in water.
• Calibration standard available as Diesel #2/motor oil and
Diesel #2/mineral oil.
500 µg/mL each in acetone, 1 mL/ampul (1 mL is enough mix to spike one 900 mL quality
control sample). Total hydrocarbon concentration is 1,000 µg/mL.
cat.# 31641 (ea.)
Diesel #2 (additive-free) (68334-30-5)
Motor oil (additive-free bp 325–460 or C18–C32 retention time range) (64742-65-0)
Quality Control Standard Mixture, Revised
(2 components)
• Updated reference materials for GC analysis of TPH in water.
• Determination of hydrocarbon oil index—applicable to
drinking, surface, waste, and treated water.
500 µg/mL each in acetone, 1 mL/ampul (1 mL is enough mix to spike one quality control
sample). Total hydrocarbon concentration is 1,000 µg/mL.
cat.# 31631 (ea.)
Diesel #2 (additive-free) (68334-30-5)
Mineral oil (additive-free [i.e., USP grade] bp 391–522 or C24–C40 retention time range)
(8042-47-5)
Quality Control Standard Mixture (2 components)
• For GC analysis of total petroleum hydrocarbons (TPH)
in water.
• Environmentally safer than previous methods.
• Calibration standard available as Diesel #2/motor oil and
Diesel #2/mineral oil.
Disinfection By-Products
1,000 µg/mL in acetonitrile, 1 mL/ampul
cat.# 30609 (ea.)
Chloral hydrate (302-17-0)
Chloral Hydrate
2,000 µg/mL each in acetone, 1 mL/ampul
cat.# 30616 (ea.)
Bromochloroacetonitrile (83463-62-1)
Chloropicrin (76-06-2)
Dibromoacetonitrile (3252-43-5)
Dichloroacetonitrile (3018-12-0)
1,1-Dichloro-2-propanone (513-88-2)
Trichloroacetonitrile (545-06-2)
1,1,1-Trichloro-2-propanone (918-00-3)
Disinfection By-Product Mix (7 components)
Drinking Water Odor
100 µg/mL in P&T methanol, 1 mL/ampul
cat.# 30608 (ea.)
(+/–)-Geosmin (16423-19-1)
2-Methylisoborneol (MIB) (2371-42-8)
DrinkingWater Odor Standard (2 components)
• Reference mix of the two most common odor-causing
compounds.
• Convenient concentration for purge-and-trap analysis:
100 µg/mL in methanol.
Unpleasant odor in drinking water is associated with the
growth and decay of microorganisms. The threshold value for
these compounds is low (10 ppt), and purge-and-trap analyses
usually are used to quantify them.
Ethylene Oxide
500 µg/mL in dimethyl sulfoxide, 1 mL/ampul
cat.# 36005 (ea.)
50 mg/mL in methylene chloride, 1 mL/ampul
cat.# 30620 (ea.)
Ethylene oxide is available in other solvents and concentrations. Request your custom
formulation at
Ethylene oxide (75-21-8)
Ethylene Oxide