Rtx015-16-628

129 / 629

127
GC COLUMNS | PLOT COLUMNS
Fused Silica Porous Polymer Columns
Rt®-QS-BOND Columns (fused silica PLOT)
porous divinylbenzene homopolymer
• Intermediate polarity PLOT column incorporating low 4-vinylpyridine.
• Separates ethane, ethylene, and acetylene to baseline.
• Designed for the best possible separation between all C2 isomers.
• Stable to 250 °C.
similar phases
GS-Q
15-Meter 30-Meter
ID df temp. limits cat.# price cat.# price
0.25 mm 8 µm to 250 °C 19767 19768
0.32 mm 10 µm to 250 °C 19739 19740
0.53 mm 20 µm to 250 °C 19737 19738
Solvent Mixture on Rt®-S-BOND
GC_PC01080
Column Rt®-S-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19746)
Sample Solvent mixture
Injection
Inj. Vol.: 1.0 µL split
Liner: Taper (4 mm) (cat.# 20798)
Inj. Temp.: 200 °C
Split Vent
Flow Rate: 100 mL/min
Oven
Oven Temp.: 120 °C to 220 °C at 5 °C/min (hold 5.0 min)
Carrier Gas H2 , constant pressure (4.2 psi, 29.0 kPa)
Linear Velocity: 40 cm/sec @ 120 °C
Detector FID@ 220 °C
Peaks
1. Methanol
2. Ethanol
3. Acetonitrile
4. Acetone
5. Dichloromethane
6. 1,1-Dichloroethene
7. Nitromethane
8. trans-1,2-Dichloroethylene
9. cis-1,2-Dichloroethylene
10. Tetrahydrofuran
11. Chloroform
12. Ethyl acetate
13. 1,2-Dichloroethane
14. 1,1,1-Trichloroethane
15. Benzene
16. 1,2-Dimethoxyethane
17. Trichloroethylene
18. 1,4-Dioxane
19. Pyridine
20. Dimethylformamide
21. Methylcyclohexane
22. Toluene
23. 2-Hexanone
24. Chlorobenzene
25. Ethylbenzene
26. m-Xylene
27. p -Xylene
28. o -Xylene
Rt®-S-BOND Columns (fused silica PLOT)
porous divinylbenzene homopolymer
• Midpolarity PLOT column, incorporating high 4-vinylpyridine.
• Use for the analysis of nonpolar and polar compounds.
• Stable to 250 °C.
similar phases
CP-PoraPLOT S
15-Meter 30-Meter
ID df temp. limits cat.# price cat.# price
0.25 mm 8 µm to 250 °C 19769 19770
0.32 mm 10 µm to 250 °C 19747 19748
0.53 mm 20 µm to 250 °C 19745 19746
Refinery Gas Mixture on Rt®-QS-BOND
GC_PC1143
Column Rt®-QS-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19738)
Sample Refinery gas standard
Injection
Inj. Vol.: 20 µL split
Liner: 2 mm (cat.# 20712)
Inj. Temp.: 200 °C
Split Vent
Flow Rate: 35 mL/min
Oven
Oven Temp.: 40 °C (hold 2 min) to 225 °C at 15 °C/min (hold 5 min)
Carrier Gas He, constant pressure (11.5 psi, 79.3 kPa)
Linear Velocity: 68 cm/sec @ 40 °C
Detector TCD@ 225 °C
Make-up Gas
Type: He
Data Rate: 20 Hz
Sensitivity Mode: He/H2
Instrument HP5890 GC
Peaks
1. Air
2. Methane
3. Carbon dioxide
4. Ethylene
5. Acetylene
6. Ethane
7. Propylene
8. Propane
9. Propadiene
10. Isobutane
11. Isobutylene
12. 1-Butene
13. 1,3-Butadiene
14. n -Butane
15. cis-2-Butene
16. trans-2-Butene
17. Isopentane
18. 1-Pentene
19. 2-Methyl-2-
butene
20. n -Pentane
21. cis-2-Pentene
22. n -Hexane