42
C
CALIBRATION
!"#$%"&'!"&()*++"(',&+-.!'"('&/&)0('&10%'*2+"&3%#45"++(&-6&'!"&50%+37&8'$(&
convenient. vI has a range to 300°C and is perfect for checking RTD s,
thermocouples and bi8metal
'!"%)0)"'"%(&-6&'!"&9"+37
Plug it in, switch it on, set the temperature with the
front panel buttons and insert your probe into the
properly sized well.
Compare the reading ofyour device to the display
temperature, and the diference is the error in your
device.
The Cali 350 has a display resolution of0.1 degrees, an accuracy of±1°C, a
stability of±0.3°C.
Temperature
Model
CALI-350
Range
35°C to 300°C
Accuracy
±1°C
Stability
±0.3°C
Heating times
15 M inutes
Well depth
100mm
Power
230V/60Hz
Size (mm)
H57xW 125xD 150
Weight
3 kg
CALI-350, Portable Dry-Well Calibration, Up To 300
O
C
3/16”
3/8”
1/8”
1/4”
The Portable Thermocouple calibrator is a
high stability heat source designed for the
calibration ofthermocouples up to 7.5mm,
with a maximum operating temperature of
1200°C. Thermocouples are inserted into
the work tube through an insulation plug
CALI-1200 , Thermocople Calibration Furnace 400÷1200°C
Model
CALI-1200
Max. temperature (°C)
1200
Continuous temperature (°C)
1150
Temperature range (°C)
40081200
Stability
Better than +1°C
Overall dimensions (mm)
W 310xD 225xH399
Heated length (mm)
150
Controller
eurotherm 2132
Indicator
eurotherm 2132
Heating rate
20 mins (to 1150°C)
Cavity diameter (mm)
20
Weight (kg)
8.8
Furnace voltage
120/240 externally selectable
Max. power (W)
1100
Thermocouple type
N
CALI-1200
WBL-102
WBL-102, Temperature
Calibration Water Bath
-30÷100°C
M RC Temperature Calibration Bench
top Bath covers a range from 830°C
'0&:;;<=&5-'!&('*2-+-'#&/&>6-?0%)-'#&0?&
± 0.1C. tank volume is nine liter8large
enough to test many sensors at once.
Bath opening is 200 x 150 mm, and 150
mm deep.
Using high precision PID microprocessor
controller Eurotherm model 3216 with
high stability RTD sensor.
W ith optional RS8232 communication to
control the bath from a PC.
/&@*6&2"&@0)1*%"3&5-'!&'!"&'")1"%*'>%"&-63-@*'0%7&8'&-(&10%'*2+"&*63&("+?&@06'*-6"3,&5-'!&2>-+'&-6&A8B&)-@%01%0@"((0%&@06'%0++"%&
/&("1*%*'"&3-.-'*+&'")1"%*'>%"&-63-@*'0%&.-C-6.&:<=&%"(0+>'-067& !"&(1"@-*+&50%D&'>2"&3"(-.6&%"(>+'(&-6&*&)>@!&!-.!"%&
temperature uniformity than is normally associated with a furnace ofthis size. The metallic work tube is earthed for
operator safety when used with metal sheathed mineral insulated thermocouples. The CALI81200 can be used in a laboratory
or in site as its rapid heat up and stabilization make it ideal for quick set up. W ith optional RS8232 communication to control
the bath from a PC.
Model
OBH-183
Temp. range
Room temp. +5°C to 300°C
Stability
±0.1°C
Setting/readout
D igital
Heater
1.2KW
Stirring
By built8in circulation pump
Inside dimen.
W 30xD 30xH20cm
Outside dimen.
W 66xD 40xH39.5cm
Volume
18L
Power source
110/220V 50/60Hz, 13A/6.5A
OBH-183
OBH-183, Temp. Calibration
Oil Bath Up To 300°C
CALI-350
Website : www.chromtech.net.au
E-mail: info@chromtech.net.au
Tel No : 03 9762 2034 . . . in AUSTRALIA