Basic HTML Version
11
139SP Series mICRO-pump
For precise dispensing between 20 and 60µl and
flow rates up to 7.2 ml/min in a manifold mountable design
•
Self-priming
•
20-60µl discrete dispense volumes
•
Up to 7.2 ml/min maximum flow rate
•
Manifold mountable
This sibling to the 130SP Micro-Pump duplicates the performance
characteristics but is supplied ready for mounting in your manifold.
Please contact us if you would like us to supply the manifold (see page
12).
Materials available for the wetted parts are:
•
Body materials: PTFE, POM, PEEK™
•
Diaphragm materials: PTFE, EPDM
•
Check valve materials: EPDM, FKM, FFKM
139SP series options
NOTE: For 24 VDC, replace 139SP12 with 139SP24 in
any of the part numbers listed.
ARRANGEMENT
Lead wires
Solenoid
Body
Mounting
screws
Locating pin
PEEK™ support
plate (not
wetted, PTFE
version only)
SPECIFICATIONS
PART NO.
Dispense
Vol (μl)
body
Material
diaphragm
material
check valve
material
12 VDC; 20µl dispense
139SP1220-1TP 20 PTFE
PTFE
FFKM
139SP1220-5TP 20 PEEK™ PTFE
FFKM
139SP1220-5TV 20 PEEK™ PTFE
FKM
139SP1220-5TE 20 PEEK™ PTFE
EPDM
139SP1220-6TV 20 POM PTFE
FKM
139SP1220-6EE 20 POM EPDM EPDM
12 VDC; 30µl dispense
139SP1230-1TP 30 PTFE
PTFE
FFKM
139SP1230-5TP 30 PEEK™ PTFE
FFKM
139SP1230-5TV 30 PEEK™ PTFE
FKM
139SP1230-5TE 30 PEEK™ PTFE
EPDM
139SP1230-6TV 30 POM PTFE
FKM
139SP1230-6EE 30 POM EPDM EPDM
PART NO.
Dispense
Vol (μl)
body
Material
diaphragm
material
check valve
material
12 VDC; 40µl dispense
139SP1240-1TP 40 PTFE
PTFE
FFKM
139SP1240-5TP 40 PEEK™ PTFE
FFKM
139SP1240-5TV 40 PEEK™ PTFE
FKM
139SP1240-5TE 40 PEEK™ PTFE
EPDM
139SP1240-6TV 40 POM PTFE
FKM
139SP1240-6EE 40 POM EPDM EPDM
12 VDC; 50µl dispense
139SP1250-1TP 50 PTFE
PTFE
FFKM
139SP1250-5TP 50 PEEK™ PTFE
FFKM
139SP1250-5TV 50 PEEK™ PTFE
FKM
139SP1250-5TE 50 PEEK™ PTFE
EPDM
139SP1250-6TV 50 POM PTFE
FKM
139SP1250-6EE 50 POM EPDM EPDM
12 VDC; 60µl dispense
139SP1260-6EE 60 POM EPDM EPDM
The 139SP has the same specifications as the 130SP (see page 7)