167
COLOR
C
RGB-1002, color analyzer, R, G, B, Hue, Saturation, Luminance
●
The RGB-1002 is a portable color meter equipped with an external
sensor probe having a 45°/0° color measuring geometry. The modem,
accurate microprocessor technology uses the spectral analysis method to
determine the color of the sample. Excellent repeatability due to
spectroscopic analysis technique used. Saturation value: 0 to 1.000.
●
Friendly operation, just press the operation button to get the color value (R,
G, B or H, S, L).
●
Relative function, can easily compare the color value of
the different two measurement materials
●
The RGB-1002 is designed mainly
for measuring the color of no lighting sample such as textiles, paper,
leathers, painting materials. It is a useful tool for the quality control and
the wide industrial application.
●
The color analyzer also can measure the
reference lighting sample color value such as CRT, LCD monitor, LED lamp,
lighting lamp.
●
For no lighting sample color measurement, a defined light
source illuminates the sample and the reflected surface light is
spectrometrically analyzed.
●
For lighting sample color measurement, the
light source of sample is spectrometrically analyzed directly.
●
RS232
computer interface, can store the measuring color value in the computer
for recording and further color analysis.
●
Build in CAL (Calibration)
button, for no lighting sample measurement, use the included white color
calibration card to make the self calibration easily.
●
Hand held housing
case, easy to carry out.
●
Power supply by 006P DC 9V battery or DC 9V
adapter.
●
To check the color value of textiles, paper, leathers, painting materials.
●
The objective quality control of color during production.
●
The color measurement and recording of products supplied by supplier to check for conformity specification.
●
The comparison of color samples against color standard.
●
The interpretation and statistic evaluation of color sample measurement.
●
To check the reference color value of CRT monitor, LCD monitor, light lamp.
Applications
Model
RGB-1002
Display
LCD size : 59 mm x 34 mm.
Measuring geometry
45° /0° - circular illumination at 45°, measurement at 0°.
Spectral range
400 nm to 700 nm.
Light source
Two white LED lamp.
Measuring principle
For no lighting sample color measurement such as textiles, paper, leathers, painting
materials, a defined light source illuminates the sample and the reflected surface
light is spectrometrically analyzed. * For lighting sample color measurement,
the light source of sample is spectrometrically analyzed directly.
Color sensors
3 color photo transistors: Red photo transistor Green photo transistor Blue photo transistor
Calibration
Self calibration. * The calibration white calibration card is included.
Measurement
RGB value R (Red) value: 0 to 1023, G (Green) value: 0 to 1023, B (Blue) value : 0 to 1023.
HSL value Hue value: 0 to 1.000, Saturation value: 0 to 1.000, Luminance value: 0 to 1.000.
Repeatability
R (Red) value < 3, G (Green) value < 3, B (Blue) value < 3,
Hue value < 0.01, Saturation value < 0.01, Luminance value < 0.01
* Repeatability is specified under the same sample tested 10 times within two minutes.
* Accuracy is specified under after the instrument is calibrated.
Buttons
OP button (Operation button)
CAL button (Calibration button)
REL button (Relative button)
RGB/HSL button (Select RGB or HSL value
Light ON/OFF button
* No lighting sample measurement, select the sensor light to on.
* Lighting sample measurement, select the sensor light to off.
Power off
Auto shut off saves battery life or manual off by push button.
* Power will off automatically after 3 min., if no buttons be pressed.
Low battery
Low battery indicator.
Computer interface
RS 232 PC serial interface.
Operating Temp.
0°C to 50°C (32°F to 122°F)
Operating Humidity
Less than 80% R.H.
Power Supply
DC 9V battery, Alkaline type 006P, MN1604(PP3) or equivalent.
DC 9V adapter input. @ AC/DC power adapter is optional.
Power Current
Standby : Approx. DC 6.3 mA. Measurement : Approx. DC 32 mA. (2 SEC.)
Weight
478 g/ 1.05 LB. * Main instrument and the sensor probe
Dimension
Main instrument: 203 x 76 x 38 mm, Sensor probe: 160x92x45 mm
Accessories Included
* Instruction manual: 1PC * Sensor probe (RGB-1002P): 1 PC * White color calibration card: 1 PC
* Carrying case, CA-06: 1 PC
Optional Accessories
* AC to DC 9V adapter. * RS232 cable, UPCB-02. * USB cable, USB-01.
* Data Acquisition software, SW-U801-WIN.
RGB-1002
Meter
