161
COAL ANALYZERS
C
Moisture/Ash Testers
Model
MOIST-41
Max Sample
18 samples (Inherent moisture)
9 samples (total mo moisture)
Sample Weight
(0.9-1.1)g for moisture content on air
dried basis; (10-12)g for total moisture
Furnace Temperature
105
°
C t0 110
°
C
Temp. Control Precision
±3
°
C
Analysis Time
(20-40)min
Power Requirement
220V(-15%-10%), 50Hz
Max Power
1.5kw
Size / Net weight
542x506x564mm / 53kg
Standard Layout
Moisture Tester / Lenovo PC
(Desktop) / Printer
MOIST-41, Moisture Tester
Application:
Moisture Tester can be used 10 determine moisture content
on air dried basis and total moisture in coal, coke,
petroleum. minerals and so on.
Conformance with Standards:
ISO117722 Solid mineral fuels Hard coal Determination of
moisture in the general analysis test sample by drying in
nitrogen ASTM D5142-09 Standard Test Method for
Proximate Analysis of the Analysis Sample of Coal and
Coke by Instrumental Procedures GB/T212-2008 Standard
Test Method for Proximate Analysis of coal GB/T211-2007
Determination of total moisture in coal.
ASH-10, Ash Fusion Tester
High automation
Automatically loading the cone support at ambient
temperature. Automatically identifying four
characteristic temperatures.
More sample loading
Up to 9 samples can be loaded once.
Real-time monitor test process
Equipped with CCD camera technology, the whole
test process will be monitored in real time, the images
will be shown on the computer screen & stored.
Accurate test result
HD color camera makes the images clearer, thus the
identification of characteristic temperature can be
more accurate.
Recheck the test result available
On completion of the test, the stored image can be
replayed for finding the characteristic temperature
manually.
Precisely controlled furnace temperature
Low gas consumption
Model
ASH-10
Samples Number
5 (9 samples available according
to customers requires)
Max. Temperature
1600
0
C
Temp. Resolution
1
0
C
Furnace Material
Mullite
Heating Element
Silicon, Molybdenum rods
Heating Rate
(User-defined available)
20
±
5
0
C/min(
≤
900
0
C)
5
±
1
0
C/min(
>
900
0
C)
Test Atmosphere
Reducing atmosphere: Gas
flow method; Oxidizing
atmosphere: Air flow method
Power Requirement
220V (-15%-10%), 50Hz
Max Power
2.4kw
Size / Net weight
550x850x843mm / 100kg
Standard Layout
Ash Fusion Tester / Lenovo PC
(Desktop) / Printer
Wide application scope, high test capacity
Applicable to aII varieties and types of coke and
coal. It can test 18 samples for moisture content on
air dried basis or 9 samples for total moisture each
time and is capable of testing several batches of
samples continuously.
Satisfying umpire analysis
With the provision for passing a current of dry
nitrogen through it & adopting light-wave healing.
which features high heating rate and even heat
distribution. the equipment satisfy umpire analysis.
High automation
Automatic weighing function could display real-time
sample weight & calculate test results automatically.
Application:
Can be used to determine the four characteristic
temperatures (DT, ST, HT & FT) of coal and coke ash.
Conformance with Standards:
ASTM D1857-04 Standard Test Method
for Fusibility of Coal and Coke Ash.
ISO540 (2004)Hrd coal and coke
Determination of ash fusibility.
GB/T2192008 Standard Test Method
for Fusibility of Coal.
Easy to operate and handle
- Easy to use Windows based software.
- Easy data handling, real time data can be transmitted
through internal network.
- With CAN bus interface, several ash fusion testers
can be controlled by a single PC.
Easy to handle
With CAN bus, several moisture testers can be controlled
by a single PC balance could be connected and data
could be transmitted by real-time network transmission.
ASH-10
MOIST-41
