05
02
SAFETY PRECAUTIONS
Keep it away from children !
This device is not intended to use by individuals with restricted physical sensory or
metal capacities or those with lack of experience or knowledge, include children,
unless they are supervised by an individual who is responsible for their safety or
have received training in operating the device .
Please read the following very carefully as failure to
comply may invalidate your guarantee
To avoid electrical shock:
1) DO NOT run the cleaner continuously for more than one hour at a time,
as doing so can damage the internal components.
2) DO NOT operate the unit without fluid in the tank. Always ensure the
fluid is no higher than the max mark, Always ensure there is a minimum
depth of 7cm.
3) DO NOT drop any item into the tank as this may cause damage to the
transducer. Always place the items gently into the tank and use the
basket whenever possible.
4) The more items that you place in your cleaning bath the less efficient it
will clean.It is not advised to overlap items. Always allow plenty of clear
space between the items.
5) Do keep the lid on during use. This will prevent splashes and reduce
evaporation
of the fluid.
6) Never immerse the machine or power cord in water or other liquid.
7) DO NOT touch the power plug with wet hands, especially when inserting
or removing the plug.
8) DO NOT touch the unit if the machine has fallen into water during operation.
Remove the power plug from the socket first.
9) DO NOT disassemble the machine, except by professionals.
10) UNPLUG the power source while filling or emptying the tank.
11) DO NOT spray water or liquid over the device and the control panel.
12) DO NOT operate the cleaner without proper grounding.
13) DO NOT place the device on a soft surface, where the vents could be
blocked.
14) Upon completion of the cleaning cycle, turn the heater knob off and
the
machine from the electrical supply.
isolate
15) Take care when adding or removing items from the cleaning tank as the
is likely to be hot and displaced fluid can damage the internal
fluid
Any displaced fluid must be dried up immediately.
components
G:Soft:60% power for delicate applications .
H:Normal 100% power to the tank for normal applications .
I:Timer increase :Press this button to set the cleaning time
Press one time to increase 1minute,holding the key to increase
by 10minutes.
J:Timer reduce :
Press one time to reduce 1minute,holding the key to reduce by
10minutes.
A:LED display temperature.
B :LED display cleaning time.
C:Heating button:Press this button for start/stop heating.
(Note:1:The new machine will display the ambient temperature when first time use.)
D:IncreaseTemperature :
Press this button to set the temperature.
Press one time to increase 1
℃,
holding the key to increase by 10
℃
E:Temperature reduce:
Press this button to set the temperature.
Press one time to reduce 1
℃
,holding the key to reduce by 10
℃
.
F:Degas:Fresh solutions with many air which reduce effective ultrasonic action.
Using Degas mode speeds up the degassing process and improves cleaning
efficiency.
Step Action
1
.
Select your cleaning solution, fill at least ½ of solution into the tank.
Do not exceed the filling line.
Note:
Do not ever use alcohol, gasoline or flammable solutions. Doing
so could cause a fire or explosion. Use only water-based solutions.
Place the items into a basket, Slowly lower the basket into tank, do
not allow items to contact the tank bottom (solution should cover the
items).
2
.
Plug the cleaner into grounded outlet.
Note:
After the power on, the temperature you see on the machine is
environment temperature. Time and temperature default as the last
setting ones.(3 minutes default time for initial use)
3
.
Timer
Heating Press
to start/stop heating. Press to setting
the temperature.
Note:
1. To get the best cleaning result, the solution’s temperature we
suggest is 40-60
℃
. Warm water and dish washing liquid can soften
grease and improve cleaning result.
Press to setting the cleaning time. When timer
count down to 00:00, the ultrasonic stop working.
Note:
The device with memory function and acquiesce in the time
you setting last time.
OPERATION GUIDELINES
28
