U-466 andU-466S
StaticMixing Tees
withF-300Fingertight Fittings
for 1/16”OD tubing
StaticMixingTees
XX
PEEKbodywith two-piece fingertight fittings
XX
Low swept volume
Upchurch Scientific
®
StaticMixing Tees are ideal formicrobore or
analytical gradient HPLC. They have a low swept volume of 2.2 µL
(includes frit volume) and are designed for flow rates of 0.5 to
3mL/min and amaximumpressureof 5,000psi (345bar). Theback
pressurecausedby the tee is typicallyonly10 to20psi (0.7 to1.4bar)
at theseflow rates.The thru-holesare0.020” (0.50mm)and thecenter
port featuresa10µmUHMWPEor stainlesssteel frit thataidsmixing.
PartNo.
Description
Threads
Includes
Thru-hole
SweptVolume
PressureRating
STATICMIXINGTEE
U-466
PEEKStaticMixingTee for 1/16”ODTubing, 10µmUHMWPEFrit
10-32Coned
(3) F-300
0.020” (0.50mm)
2.2µL
5,000psi (345bar)
U-466S
PEEKStaticMixingTee for 1/16”ODTubing, 10µmSSTFrit
10-32Coned
(3) F-300
0.020” (0.50mm)
2.2µL
5,000psi (345bar)
MICROSTATICMIXINGTEE
M-540
PEEKMicroStaticMixingTee, for 1/16”ODTubing
5/16-24Coned (3) F-132/P-416
0.010” (0.250mm)
0.95µL
5,000psi (345bar)
NOTE
XX
Turbulentmixingof solvents often increases outgassing.
Tomaintain abubble-free fluidpathway, we recommend
solvent degassingwhenusing this product.
XX
The frit incorporated intoour U-466 andU-466SStaticMixing
Tees is not replaceable. If it becomes clogged, theMixingTee
must be replaced.
RELATEDPRODUCTS
XX
See theSystec
®
VacuumDegassingSystems onpages 178.
XX
Our standardStaticMixingTees aredesigned for flow rates from
0.5mL/min to3mL/min.
MicroStaticMixingTee
XX
Constructedof inert PEEK andPCTFE
XX
Low swept volumeof 0.95µL
XX
Designed for flow rates of 20–250µL/min
TheUpchurchScientific
®
MicroStaticMixingTeeutilizesaspecifically
engineered internal geometry to efficientlymix two fluid streams
intoone combined stream. The center port also features a 0.5 µm
porosityPEEKpolymer frit toaid inmixing. This frit adds amaximum
of 20psi (1.4bar) back pressure tomost systems (within the stated
flow rate range). TheMixing Tee handles amaximum pressure of
5,000psi (345bar) whendirectly connecting 1/16”OD tubing, or up
to4,000psi (276bar)withcapillary tubingwhenusingourNanoTight
™
Fittings andTubingSleeves (pages 17and19).
M-540
MicroStaticMixingTee
0.010” thru-hole
withfittings included
(tubingand tubing
sleevesnot included)
1.10”
(2.79cm)
0.67”
(1.70cm)
IN
IN
OUT
«
«
«
PEEKFrit
Inlet 1
Outlet
Inlet 2
44
CONNECTORS
HighPressure Specialty Tees
