GoldTipTransferLine
• For usewithAgilent 5971/5972MS Systems.
• Gold-plated for inertness.
• Meets or exceedsOEMperformance.
Description
Similar to
Agilent part#
qty.
cat.#
price
GoldTipTransfer Line
05971-20305
ea.
24699
$191
MSDConversionFitting
• A flat, soft aluminum sealing ringdeforms andbutt-seals against theMSD interface.
• A standardVespel® ferrule seals the column and
1
/
16
-inch stainless steel nut.
• Fitting is constructedof nickel-platedbrass for longevity and softness.
• Use any standardVespel®orVespel®/graphite
1
/
16
-inch ferrule.
• Includes a
1
/
16
-inch stainless steel nut and two replacement sealing rings.Order ferrules separately.
Agilent’sMSD interface uses
a butt-seal to simultaneously
seal theMSD source to the
capillary column.This system
is prone to leakage. Restek’s
MSD conversion fitting is
designedwith two separate
seals to reduce the chance of
leaks: a crunchwasher seals
theMSD conversion fitting to
the source; a ferrule seals
the capillary tubing to the
conversion fitting.
source
source
butt-seal with
ferrule
column seals only
at taper
crunchwasher
forms leak-tight
seal—easier to
remove
shoulder
strength
increased
ferrule seals
against both
column and
fitting
AgilentDesign
ImprovedRestekDesign
MSDSourceNut
• 1.2mmnut bore permits easy removal of ferruleswith a standard tapered-needle file (cat.#20106).
• Made of brass toprevent thread-strippingon the transfer line.
• Improveddesign enhances ease of threadingonto the transfer line and improves overall lifetime.
Capillary InstallationGauge forAgilent5973/5975MS
• Seats ferrules onto column for consistent installations.
• Made fromhigh-quality stainless steel.
Description
Similar to
Agilent part#
qty.
cat.#
price
(Detector) MSD SourceNut
05988-20066
2-pk.
20643
$21
Description
qty.
cat.#
price
MSD Conversion Fitting
ea.
21314
$43
Replacement Ring Seal forMSD Conversion Fitting
2-pk.
21313
$14
Description
Similar to
Agilent part#
qty.
cat.#
price
Capillary InstallationGauge for Agilent 5973/5975MS G1099-20030
ea.
21894
$183
Improveddesign!
Install the nut and ferrule onto the column,
then insert the column through the installation
tool, exposing several centimeters at the exit
end. Tighten the nut.
Score and remove the
exposed end of the column,
then loosen the nut.
The ferrulewill be properly
seated and should remain in
placewhen light force is
applied. Install the column
into theGC/MS interface.
GC/MS Supplies
•
800-356-1688
•
22
•
