NordsonMed-ValuePlastics_pcv027_1-123

98 123

BUILD-A-PART®
027
98
TEL: +1 (970) 267-5200 TOLL FREE in USA: (888) 404-5837 805 West 71st Street • Loveland, CO 80538 • USA
Bonding Suggestions
Prior to actually bonding, press together a model of the
manifold to use as a reference.
Do not mix plastic resins. Consult your adhesive specialist if
you need to bond dissimilar materials.
These components are designed for bonding with any one
of a number of solvents, but other adhesive systems may
be used. When solvent bonding, use a very small gauge
needle (typically 27 or 30) for best solvent control. Consult
your adhesive specialist for guidance on other systems.
Apply solvent sparingly. Most solvents are low viscosity
and readily wick into the bondline. Excessive solvent may
compromise the aesthetics and the function of the assembly.
Press the mating components together leaving a .01-.03”
gap between them for the solvent. Place the components in
an orientation such that they may be rotated ¼ turn to their
final position after applying the solvent.
After applying solvent, wait a few seconds, then rotate the
components to their final position. When making a long
manifold with bondable junction blocks it may be helpful to
push the assembly against a flat surface to align the blocks
before the solvent has set.
Affordable Unique Solutions:
Design Your New Component with Build-A-Part®
Bondable Components!
Component designers
no longer need to be
constrained by
the limitations
of injection
molding tool design.
The exact fitting, in
the optimal layout for the
process or product concept,
is now available with Nordson
MEDICAL’s line of Build-a-Part®
bondable components, designed for
use with gases or liquids.
The Build-a-Part® system is based on combining
interchangeable components, joining junction blocks and
luers, hose barbs or threaded features to create the desired
configuration. The features are bonded to the junction
blocks using commonly available adhesives. Junction
blocks and features may be bonded together to create
multi-port, multi-axis products that receive and redirect fluid
flow in whatever direction the designer desires. The only
limitation is the designer’s imagination.
114 component options are available from stock in two
primary materials. Options include ISO 594-1 compliant
male and female luers and hose barbs in 1/16” (1.6 mm),
3/32” (2.4 mm) and 1/8” (3.2 mm) in straight, elbow and
branch tee configurations. Also available are male threads
including 10-32 UNF, 1/16-27 NPT, 1/8-27 NPT, 1/4-28
UNF and M6x1 versions, and mounting devices.
The complete range is available in two primary resins:
white ABS or translucent polysulfone. For ease of testing
concepts, Nordson MEDICAL offers designer kits in both
resins. Each kit contains hundreds of components for
prototype purposes, enabling designs to be created and
modified prior to production commitment.
BUILD-A-PART ®
Fittings
9 nv