Rtx015-16-628

294

www.restek.com

GC ACCESSORIES |

GAS MANAGEMENT

Gas Management Supplies

Specifications:

Length:

21" (53.3 cm)

Diameter:

1.5" (3.8 cm)

Maximum Inlet Pressure:

1,000 psi (6895 kPa)

Maximum Recommended Flow:

500 mL/min

Pressure Drop from 120 psi (827 kPa)

inlet at a flow of 0-500 mL/min:

<0.20 psi (1.4 kPa)

Compression End Fittings:

" or

", stainless steel

Shipping Weight:

3.04 lb (1,300 g)

*Warning: Do not use with nitrogen containing more than 500 ppm of oxygen. If the

oxygen level in the stream exceeds 500 ppm, use an air purifier.

VICI® Mat/Sen® Gas-Specific Purifier Modules

• Replace separate oxygen, moisture, and hydrocarbon traps

with one multiple-bed purifier, specific for purifying helium,

hydrogen, nitrogen, or air.

• Reduce gas impurities from ppm to low ppb levels.

• Decrease baseline noise and increase GC-MS sensitivity.

• Prepurged with the specified gas to shorten downtime.

Performance for these purifiers is optimized by incorporating a

multiple-bed format that progressively lowers concentrations of

contaminants at each successive bed. VICI® Mat/Sen® purifiers

are guaranteed to produce gases that are purer than 99.9999%,

when supplied with gas of 99.995% purity, and are prepurged

with the specified gas to speed conditioning. Purifier capacity is

approximately four tanks of gas at 99.995% (50 ppm) purity, and

correspondingly longer for purer gases.

Please Note: We recommend using an indicating oxygen trap (e.g., cat.# 22029, pg. 287)

downstream from a VICI® Mat/Sen® purifier to continually ensure gas purity and indicate

absolute change-out time.

Dimensions:

x 1

(53.3 x 3.8 cm)

Gas Pressure Gauge Kit

• Use an in-line pressure gauge

to indicate when a thermal gas

purifier getter tube should be

replaced.

• Includes

tee and 0–100 psi

(0-689 kPa) gauge.

Description

qty.

cat.#

price

In-line Gas Pressure Gauge Kit for Thermal Gas Purifiers

kit

21657

22820

21610

22800

22064

23031

23032

Replacement Chemical Traps and Parts

for Agilent GCs

• Easy to install.

• Attach to same fittings as original manufacturer’s equipment.

• Built-in frits retain fine particles; adsorbents remove both

moisture and hydrocarbons.

Compression Tube Fittings

Gas-Specific

-inch

Purifier Module

qty.

cat.#

price

qty.

cat.#

price

Helium Purifier Module

ea.

22600

ea.

22601

Hydrogen Purifier Module

ea.

22602

ea.

22603

Nitrogen Purifier Module*

ea.

22604

ea.

22605

Air Purifier Module

ea.

22606

ea.

22607

Description

Similar to

Agilent Part # qty.

cat.#

price

Replacement Split Vent Trap

for Agilent 6850/6890 GCs

G1544-80550 ea.

22820

Replacement Chemical Trap

for Agilent 5890 GCs

05890-61260 ea.

21610

Split Vent Line (32-inch) for Agilent GCs

Includes: all installation hardware

2-pk.

22800

O-Rings for Agilent Trap Fittings

5180-4181 25-pk.

22064

Optional Split Vent Trap Assembly

for Agilent 6850/6890 GCs

G1544-60610,

G1544-80530 kit

23031

Replacement Traps (2) and O-Rings (4)

G1544-80530,

5188-6495

kit

23032