269 / 629
www.restek.com
267
GC ACCESSORIES |
INSTRUMENT SUPPLIES
Supplies for Thermo Scientific GCs
Replacement Inlet Seals
for Thermo Scientific 1300/1310 GCs
The inlet seal at the base of the GC injection port contacts the sample and must be
changed frequently to prevent adsorption of active compounds. In addition, septum
fragments and sample residue accumulate on the disk surface, requiring disk
replacement.
Note: The 1.2 mm inlet seal is recommended when
installing two columns using a two-hole Vespel®/
graphite ferrule.
Replacement Inlet SealsWithWashers
• Siltek® treatment provides inertness similar to fused silica.
• All seals include washers.
Cross-Disk Inlet Seals
for Thermo Scientific 1300/1310 GCs
All seals include washers.
22231
22237
22235
22239
NEW!
Dual Vespel® Ring Inlet Seals
Washerless, Leak-Tight Seals for Thermo 1300/1310 GCs
• Does not require a separate washer.
• Requires less torque to seal.
• Does not require retightening of reducing nut after several oven cycles.
• Extends column lifetime by preventing oxygen from reaching the column.
• Same price as the regular inlet seals with washers.
• Siltek® treatment provides enhanced inertness versus stainless steel.
Our patented dual Vespel® ring inlet seal greatly improves injection port perfor-
mance—it stays sealed, even after repeated temperature cycles, without retightening
the reducing nut! This seal features two soft Vespel® rings, one embedded in its top
surface and the other embedded in its bottom surface. These rings eliminate the need
for a washer and ensure very little torque is needed to make a leak-tight seal. The rings
will not harm the critical seal in the injector body, or any other surface, and are outside
the sample flow path.
To reduce breakdown and adsorption of active compounds, use a gold-plated or
Siltek®-treated seal.
Patented
Feature
Benefit
Vespel® ring embedded in bottom surface.
Vespel® ring embedded in top surface.
Lower leak rate compared to OEMmetal inlet seals.
Prevents oxygen from permeating the carrier gas.
Eliminates need for a washer.
Very little torque required to make seal—reduces operator
variability.
Less detector noise.
Increases column lifetime.
2-pk.
10-pk.
0.8 mm ID Dual Vespel Ring Inlet Seal
cat.#
price
cat.#
price
Gold-Plated
22243
22244
Siltek-Treated
22247
22248
2-pk.
10-pk.
1.2 mm ID Dual Vespel Ring Inlet Seal
cat.#
price
cat.#
price
Gold-Plated
22245
22246
Siltek-Treated
22249
22250
Single-Column Installation
0.8 mm ID (Opening)
Similar to Thermo Part #
qty.
cat.#
price
Gold-Plated
290GA082
2-pk.
22231
Gold-Plated
290GA081
10-pk.
22232
Siltek-Treated
290GA092
2-pk.
22237
Siltek-Treated
290GA091
10-pk.
22238
0.25/0.32 mm ID Dual-Column Installation
1.2 mm ID (Opening)
Similar to Thermo Part #
qty.
cat.#
price
Gold-Plated
290GA122
2-pk.
22233
Gold-Plated
290GA121
10-pk.
22234
0.8 mm ID Cross-Disk Inlet Seal
Similar to Thermo Part #
qty.
cat.#
price
Gold-Plated
290GA083
2-pk.
22235
Gold-Plated
290GA084
10-pk.
22236
Siltek-Treated
290GA093
2-pk.
22239
Siltek-Treated
290GA094
10-pk.
22240