![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0219.jpg)
217
GC ACCESSORIES |
INLET LINERS
Inlet Liner Accessories
Mini Wool Puller/Inserter
Insert and remove wool plugs easily. Order a spare pack so you’ll
always have one available.
Description
qty.
cat.#
price
Mini Wool Puller/Inserter
2-pk.
20114
tech tip
Injector Maintenance
Approximately ninety percent of “bad”chromatography is traceable to
problems in the injection port. These problems include contaminated
carrier gas, incorrect injector flows, active or dirty sites on inlet seals and
liners, improper use of wool, leaks, backflash, discrimination, incorrect
injector temperature, poor column installation, and use of the wrong in-
jection technique. To minimize injection port problems, set up a routine
maintenance schedule and be sure to investigate the injector first when
troubleshooting.
Eliminates user variation!
Loosen the nut on
the side of the tool
and adjust the gauge
to the manufacturer
’
s
recommended depth.
Place a plug of
loosely bound wool
at the top of the inlet
liner.
Insert the liner
packing tool into the
liner until the tool
bottoms out. Remove
the tool. The wool
is now positioned
correctly in the liner
and the liner is ready
for use.
No more burned
fingers!
20181
26262
26261
Inlet Liner Packing Tool
• Position wool reproducibly every time.
• Accurate to a specific, measured depth.
• Can be used with all manufacturers’ liners.
Recommended for inlet liners with an ID ≥ 2 mm.
Description
qty.
cat.#
price
Inlet Liner Packing Tool
ea.
20339
Inlet Liner Removal Tool
• Easily remove liner from injector—no
more burned fingers.
• Made from high-temperature silicone.
• Won’t chip or crack the liner.
Description
qty.
cat.#
price
Inlet Liner Removal Tool
3-pk.
20181
The Claw and The Claw Holder Kit
• Easily removes hot liners from
injection ports.
• 4 mL vials (not included) can be
replaced when dirty.
Never again will you burn your fingers
removing a hot injection port liner.
The Claw safely and cleanly removes
liners, O-rings, or other small objects
from the injection port. You can then
place the hot objects in a clean 4 mL
vial situated in The Claw holder until
ready for reuse.
Description
qty.
cat. #
price
The Claw
ea.
26261
The Claw Holder Kit (includes The Claw and holder)
kit
26262
WISP 48 Snap Seal Vial
100-pk.
24658
Use the .
other end to
remove wool.
Use one end to
insert wool.
20114
20114