19
Restek has specially engineered a high-precision,
1
/
16
-inch fitting that uses standard size, two-hole
capillary ferrules. The fitting kit comes with everything needed for dual-column confirmational analysis
using 0.25 and 0.32mm ID capillary columns (two-hole ferrulesmust be ordered separately).
Capillary Inlet Adaptor FittingKit
(for 0.25/0.32mm ID columns)
:
cat.# 20633
Replacement Inlet Seal
(1.2mm hole): cat.# 20390, (2-pk.); cat.# 20391, (10-pk.)
Hewlett-Packard
1
/
16
-InchCapillary Inlet Adaptor FittingKit
Restek has specially engineered a high-precision,
1
/
8
-inch fitting that uses standard
1
/
8
-inch, two-hole capillary ferrules. The fitting kit comes with everything needed for installation.
1
/
8
-inchCapillary Inlet Adaptor FittingKit
(for 0.53mm ID columns)
:
cat.# 20645
Replacement Inlet Seal
(
1
/
16
-inch hole): cat.# 20392, (2-pk.); cat.# 20393, (10-pk.)
Hewlett-Packard
1
/
8
-InchCapillary Inlet Adaptor FittingKit
Includes a
1
/
16
-inch nut, a
1
/
16
-inch ferrule, a base nut and
1
/
4
-inchVespel
®
/graphite ferrule, a
1
/
16
-inch
capillary nut, a 5-pack of low-bleed plug septa, and a special low-mass septum nut. Order appropriate
capillary ferrules separately.
Low-Volume Injector forHewlett-Packard andVarianGCs
Description
Kit
LVI for HPSplit/SplitlessGC inlets
cat.# 21692
LVI for Varian Split/SplitlessGC inlets
cat.# 21693
Includes a
1
/
16
-inch nut, a
1
/
16
-inch ferrule, a base nut and
1
/
4
-inchVespel
®
/graphite ferrule, a
1
/
16
-inch
capillary nut, a 5-pack of low-bleed plug septa, and a special low-mass septa nut. Order appropriate
capillary ferrules separately.
Low-Volume Injector forHewlett-Packard 5890 SeptumPackedPurge Port
Description
Kit
LVI for HP 5890 SeptumPacked Purge Port
cat.# 21698
• Calculates linear velocity based on column ID.
• Measures N2, He, H2, 5%Ar/Me, andAir.
• Measures split flow andmass flow.
• Has pulse-free operation that will not interferewith EPCs.
• Reads flow accurately from 5 to 500mL/min.
Description
Each
RestekVeri-Flow 500 Electronic Flowmeter (110 volts)
cat.# 21643
RestekVeri-Flow 500 Electronic Flowmeter (220 volts)
cat.# 21645
RestekVeri-Flow 500ElectronicFlowmeter
The LeakDetective
™
responds in less than 2 seconds to trace leaks of gases with thermal conductivities
different than air. Helium or hydrogen can be detected at 3 x 10-4 cc/sec.* or at an absolute concentra-
tion as low as 200ppm. Leaks are indicated by an audible alarm, aswell as by anLED readout. (Batteries
andAC adaptor included.)
*Caution: not designed for determining leaks of combustible gases.
Description
Each
Restek LeakDetective
™
Electronic LeakDetector (110 volts)
cat.# 21607
Restek LeakDetective
™
Electronic LeakDetector (220 volts)
cat.# 21609
RestekLeakDetective
™
Electronic LeakDetector
