Basic HTML Version
7
130SP Series MICRO-pump
For precise dispensing between 20 and 60µl and
flow rates up to 7.2 ml/min
•
Self-priming
•
20-60µl discrete dispense volumes
•
Up to 7.2 ml/min maximum flow rate
•
1/4”-28 UNF threaded ports
•
Most inert body material for harshest applications
The 130SP series Micro-Pumps are solenoid operated, with the
operating mechanism isolated from the flow path by a diaphragm.
Check valves situated at the inlet and outlet of the pump control the
direction of flow. The combination of materials for each component
can be selected to best suit your specific application.
Materials available for the wetted parts are:
•
Body materials: PTFE, POM
•
Diaphragm materials: PTFE, EPDM
•
Check valve materials: EPDM, FKM, FFKM
130SP series options
NOTE: For 24 VDC, replace 130SP12 with 130SP24 in
any of the part numbers listed.
PART NO.
Dispense
Vol (μl)
body
Material
diaphragm
material
check valve
material
12 VDC; 20µl dispense
130SP1220-1TP 20 PTFE
PTFE
FFKM
130SP1220-6TV 20 POM PTFE
FKM
130SP1220-6EE 20 POM EPDM EPDM
12 VDC; 30µl dispense
130SP1230-1TP 30 PTFE
PTFE
FFKM
130SP1230-6TV 30 POM PTFE
FKM
130SP1230-6EE 30 POM EPDM EPDM
12 VDC; 40µl dispense
130SP1240-1TP 40 PTFE
PTFE
FFKM
130SP1240-6TV 40 POM PTFE
FKM
130SP1240-6EE 40 POM EPDM EPDM
12 VDC; 50µl dispense
130SP1250-1TP 50 PTFE
PTFE
FFKM
130SP1250-6TV 50 POM PTFE
FKM
130SP1250-6EE 50 POM EPDM EPDM
12 VDC; 60µl dispense
130SP1260-6EE 60 POM EPDM EPDM
Lead wires
Solenoid
Body
1/4”-28
Inlet &
Outlet ports
(shown with
Omni-Lok™
fittings, see
page 17)
PEEK™ support
plates (not
wetted, PTFE
body only)
ARRANGEMENT