actuators and accessories
194
|
VICI AG International Sales: + 41–41–925–6200 Fax: + 41–41–925–6201
|
Air Actuators
more information
PFAF . . . . . . page 199
Position feedback
Mounting Hardware
Closemount
hardware . . page 208
Right angle drive . . .204
Standoff assembly . .205
Standoff mounting
hardware . . . . . 205
order tip
To purchase a
valve with
an air actuator installed
,
go directly to valve
ordering information.
Air actuators offer reliable performance under the most stringent conditions.
Low gas consumption and lightweight, compact construction make the air
actuator suitable for aerospace flight hardware applications as well as laboratory
or process applications.
The standard air actuator is rated for up to 80 psig at temperatures up to 70°C.
Generally speaking, valves which will be heated require a standoff assembly,
which locates the air actuator out of the heated zone and supports both the
valve and actuator. A high temperature model permits both valve and actuator
to be mounted within an oven (175°C maximum), but it is not recommended for
use below 50°C.
tech tip
The actuator’s rotation
must be properly
matched to the valve’s.
If you are converting
a manual valve to air
actuation and have any
doubts about which
actuator and hardware
you need, call our sales
or technical staff for
assistance.
Air Actuators for Selectors
Standard air actuators
for selectors
Temperature range 0-70°C
Standoff version includes a 2" standoff. 3", 4", and 6" standoffs are also available.
With closemount
With 2" standoff
With standoff
assembly
assembly
mounting hardware
Description Prod No
Prod No
Prod No
4 position A4
A42
A4S
6 position A6
A62
A6S
8 position A8
A82
A8S
10 position A10
A102
A10S
12 position A12
A122
A12S
16 position A16
A162
A16S
High temperature air actuators
for selectors
Temperature range 50-175°C
Standoff version includes a 4" standoff. 2", 3", and 6" standoffs are also available.
With closemount
With 4" standoff
With standoff
assembly
assembly
mounting hardware
Description Prod No
Prod No
Prod No
4 position AT4
AT44
AT4S
6 position AT6
AT64
AT6S
8 position AT8
AT84
AT8S
10 position AT10
AT104
AT10S
12 position AT12
AT124
AT12S
16 position AT16
AT164
AT16S
Replacement O-rings
Includes a complete set of O-rings for a multiposition air actuator.
Description Prod No Price
Standard
ORMP $16
High temp ORTMP
20
The recommended method for
implementing a selector (multi
position) air actuator requires only a
single 4-way solenoid. Up to 80 psig
may be used without damaging the
valve or actuator. Bottled instrument
air or nitrogen is recommended.
If plant air from compressors must be
used, an oil separator and water dryer
are required.
Multiposition air actuators include a
rotary switch which may be connected
to a digital readout or your own
design.
CHROMalytic TECHnology Pty Ltd AUSTRALIAN Distributors e-mail:
Tel: 03 9762 2034
