376
CO2 INCUBATORS
I
Air Jacket, High Heat Decontamination
Model 5215 was designed to minimize contamination & be operational
within hours of installation. This slim, lightweight incubator is easily
repositioned with minimal downtime and is well-suited for multiple users.
Three temperature control settings (main chamber, external door, and front
liner) minimize condensation and yield precise temperature uniformity with
no unwelcome temperature gradients. Our unique HEPA filtration system
removes 99.97% of all airborne microbes and isolated particulates 0.3
microns or larger. The patented copper housing around the filter is designed
to destroy microbes entrapped in the filter. Additional anti-contamination
features include a stainless steel chamber with easy-to-clean coved
corners, our Quick Clean Shelf System which disassembles without tools in
less than a minute, and our Non-Tip Shelf System to reduce spills.
A separate digital keypad with large, bright LEDs (for CO2 and temperature)
is highly visible on the front panel. The audible alarms can be muted easily,
and the redundant safety system for temperature protects samples from
overheating. In addition, the CO2 gas supply is protected by a PID with an
infrared sensor that is extremely quick to recover, a door switch that
automatically turns off the gas when the door is opened, and a sample port
on the side to help minimize waste during CO2 calibration.
Decontamination is easier than ever. The Model 3552 is the latest addition to
the 3500 Series of CO2 Incubators. Featuring a dry, high heat
decontamination cycle, the The model 3552 features a dry heat
decontamination cycle, that maintains 180oC for 120 minutes. This industry
best time and temperature relationship satisfies all global standards for
decontamination. This is decontamination at its fastest easiest and most
effective - it is not necessary to remove the IR CO2 sensor prior to activating
the decontamination process and we feature the shortest cycle time on the
market. This is a more convenient approach and eliminates potential
damage to the sensitive IR sensor. Other features of the 3352 include a USB
interface for software communication, precise temperature control
microprocessor and an independent over temperature safety controller.
Features:
●
Dry Heat Decontamination at 180 degrees C for 120 minutes.
●
Pre-heated Copper CO2 Gas Inlet for Increased Temperature Uniformity.
●
No Handling of the IR Sensor.
●
HEPA Filter.
Features:
●
Copper Enclosed HEPA Filter.
●
Infrared CO2 Sensor.
●
Heated Outer Doors.
●
Pre-heated CO2 Gas Inlet.
●
Independent Over temperature Protection.
●
Quick Clean Shelf System.
5215-2, Air Jacket
3552-2, High Heat Decontamination CO2 Incubator
5230-2, Air Jacket
Model
5215-2
5230-2
Weight (kg)
113.4
226
Capacity
142 L
284 L (142 each)
Interior Dimensions (cm)
52Wx50.1Dx54.6H
52Wx50.1Dx54.6H
Exterior Dimensions (cm)
69.3Wx71.2Dx95.9H
69.3Wx71.2Dx191.8H
Temperature Range
Ambient +5°C to 60°C
Ambient +8°C to 60°C
Temp. Uniformity
±0.25°C at 37°C
±0.25°C at 37°C
Electrical Specifications
Volts: 120V Hertz: 50/60Hz Watts: 600W Amps: 5A
CO2 Range
0-20%
CO2 Sensor
IR
CO2 Recovery Rate
< 5 minutes
Jacket Type
Air
Relative Humidity Range
Up to 95%
Shelving
3 Supplied (16 max)
3 Supplied (16 max) per unit
Access Port
1.5
Model
3552-2
Weight (kg)
125
Capacity
169 L
Interior Dimensions (cm)
51.4Wx50.8Dx64.7H
Exterior Dimensions (cm)
72.4Wx78.2Dx100.4H
Temperature Range
Ambient +5°C to 60°C
Temp. Uniformity
±0.25°C at 37°C
Electrical Specifications
Volts: 120V Hertz: 50/60Hz Watts: 600W Amps: 5A
CO2 Range
0-20%
CO2 Sensor
Infrared (IR) ±0.1%
CO2 Recovery Rate
< 5 minutes
Relative Humidity Range
Up to 95%
Shelving
3 Supplied (16 max)
Access Port
1.5
Contamination Control & Infrared (IR)
CO2 Sensors
Contamination Control & Patented
Copper Coated HEPA Filter
5230-2
3552-2
5215-2
