353
INCUBATORS
I
RS232 interface
It is a special interface for PC.
Airduct structure
It applies circular airflow design concept and
forced convection simulated air circulation
principle.
The large power air circulating blades design
can produce higher air flow rate and
guarantee high, even and stable inner chamber
temp.
Test hole
One test hole with the diameter of 45mm made
with special mould is arranged on the left & right
of the incubator respectively for observation.
Internal silica geI soft plugs are provided to
make sure the temperature inside the incubator
is not effected.
Cooling/Peltier Method
Innovative peltier cooling technology,
eliminates the need for a refrigeration
compressor in the LI6P-2 & LI20P-2. These
units use 78% less power than alternative
models and reduce room air conditioning
loads by 75%. They also include 75 pound
capacity shelves, which eliminates
sagging. These incubators meet APHA
specifications for Biochemical Oxygen
Demand (B.O.D.) & include a mechanical
convection system to ensure even air
distribution, digital temperature set
controller, over temperature limit control,
and a digital temperature display.
LI6P-2, LI20P-2, Incubators Peltier Cooled LIP Series
Model
LI6P-2
LI20P-2
Exterior Dimensions (wxdxh)
762x801x851mm 762x801x1766mm
Chamber Dimensions (wxdxh)
647x609x469mm 647x609x1384mm
Incubator Chamber Capacity
185L
546L
Power
230V, 50/60Hz
230V, 50/60Hz
Bottle Capacity
120
300
Number of Shelves
2 included
5 included
Features:
●
Independent Over Temperature Thermostat.
●
Over Temperature Alarm.
●
Temperature Uniformity
±
0.5ºC at 20ºC.
●
Temperature Range 15°C to 40°C at 20°C Ambient.
LI6P-2
LI20P-2
BOD-250A
